Pregled bibliografske jedinice broj: 124121
Determining currents of cable sheaths by means of current load factor and current reduction factor
Determining currents of cable sheaths by means of current load factor and current reduction factor // 2003 IEEE PowerTech Proceedings / Borghetti, A. ; Nucci, C.A. ; Paolone, M. (ur.).
Bolonja: Faculty of Engineering, University of Bolgna, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 124121 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Determining currents of cable sheaths by means of current load factor and current reduction factor
Autori
Sarajčev, Ivan ; Majstrović, Matislav ; Goić, Ranko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
2003 IEEE PowerTech Proceedings
/ Borghetti, A. ; Nucci, C.A. ; Paolone, M. - Bolonja : Faculty of Engineering, University of Bolgna, 2003
Skup
2003 IEEE Bologna PowerTech
Mjesto i datum
Bologna, Italija, 23.06.2003. - 26.06.2003
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
cable; current; current factor; load factor; sheath; sequence component
Sažetak
A new method for determining sheath currents as the consequence of electromagnetic coupling during line-to-ground short circuit is described it this article. This method is based on using both the current load factor and the current reduction factor. The model cables are selected to present major constructions encountered in practice. The cable line consists of three single-core cables laid in trefoil formation and touching each other. Cable sheaths are grounded at both ends. Current load factor and current reduction factor are characteristic data of the analyzed cable line. The method presented in this paper is easy to use.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Projekti:
0023015
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split
