Pregled bibliografske jedinice broj: 1233924
The steam-assisted calcination of limestone and dolomite for energy savings and to foster solar calcination processes
The steam-assisted calcination of limestone and dolomite for energy savings and to foster solar calcination processes // Journal of cleaner production, 363 (2022), 132640, 12 doi:10.1016/j.jclepro.2022.132640 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1233924 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The steam-assisted calcination of limestone and
dolomite for energy savings and to foster solar
calcination processes
Autori
Deng, Yimin ; Liu, Jia ; Li, Shuo ; Dewil, Raf ; Zhang, Huili ; Baeyens, Jan ; Mikulčić, Hrvoje
Izvornik
Journal of cleaner production (0959-6526) 363
(2022);
132640, 12
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
CO2 emission reduction ; Dolomite ; Energy savings ; Limestone ; Solar kilns ; Steam-assisted calcination
Sažetak
CaO and MgO are important industrial raw materials commonly produced by either the decomposition of calcium carbonate at about 900 °C, or the calcination of dolomite, a mixed calcium and magnesium carbonate, calcined either to MgO.CaCO3 at about 750 °C, or to MgO.CaO at 900 °C. ln this research, the decomposition reaction of 104–147 μm dolomite and limestone particles was investigated, both without and with steam added to the reaction. A series of experiments was performed in terms of relevant parameters such as time, temperature and amount of H2O added. Reactants and reaction products were fully characterized and demonstrate the different morphology and specific surface area of the raw carbonate ores and the calcined oxides. Adding H2O during calcination has a significant positive effect. The calcination shows that steam can significantly accelerate the reaction rate, and reduce the decomposition temperature by ∼100 °C, thus reducing the cost of the decomposition by increasing the yield for a given reaction time, while also reducing the required sensible heat of the feedstock and combustion air. This ultimately reduces the amount of fossil fuel or alternative energy carriers, thus reducing the CO2 footprint of the system. The improved operating conditions foster the use of concentrated solar calcination. The CO2 footprint of the carbonate decomposition can be reduced by ∼4% in traditional kilns, and by as much as 20% if concentrated solar kilns are used. Both applications are currently investigated in pilot-scale operations.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Hrvoje Mikulčić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus