Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1230217

Reproduction Quality of Thermochromic Line Prints


Itrić Ivanda, Katarina; Vukoje, Marina; Kulčar, Rahela; Cigula, Tomislav; Jakopčević, Zrinka
Reproduction Quality of Thermochromic Line Prints // 6th International Conference Materials Science & Engineering & 3rd International Conference on Functional Materials and Chemical Engineering
Dubai, Ujedinjeni Arapski Emirati: Coalesce Research Group, 2022. str. 101-101 (poster, međunarodna recenzija, sažetak, znanstveni)


CROSBI ID: 1230217 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Reproduction Quality of Thermochromic Line Prints

Autori
Itrić Ivanda, Katarina ; Vukoje, Marina ; Kulčar, Rahela ; Cigula, Tomislav ; Jakopčević, Zrinka

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
6th International Conference Materials Science & Engineering & 3rd International Conference on Functional Materials and Chemical Engineering / - : Coalesce Research Group, 2022, 101-101

Skup
3rd International Conference on Functional Materials and Chemical Engineering

Mjesto i datum
Dubai, Ujedinjeni Arapski Emirati, 09.11.2022. - 10.11.2022

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
thermochromic inks ; print quality ; line quality

Sažetak
Thermochromic printing inks change their colour under the influence of temperature. Accordingly, their measurement is challenging. So far there were no attempts of measuring the reproduction quality of the thermochromic printed lines, rather the research was directed towards colour characterization and ink stability in terms of exposure to different degradation processes. The use of thermochromic colours adds value to the product, both through its attractiveness and the information it can convey to the consumer. Therefore, it is necessary to quantitatively characterize the prints. The line is the essential object on which any design is based. Accordingly, the quality of the printed line indicates the possibility of printing fine details with thermochromic inks. In this research, novel method of characterizing thermochromic line prints is presented. Prints were made by offset printing, by applying thermochromic UV ink on commercial offset paper. Applied ink is blue below 29°C, and colourless above the specified temperature. The printed line samples were measured at 20°C, and 40°C. Cooling and heating were controlled by placing the samples on the thermostatically controlled cover water block (EK Water Blocks, EKWB d.o.o. Slovenia). Quantitative analysis of the reproduced lines was performed using Personal IAS Imaging Device (Quality Engineering Associates Inc) and ImageJ (Laboratory for Optical and Computational Instrumentation) image processing software.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija



POVEZANOST RADA


Ustanove:
Grafički fakultet, Zagreb

Poveznice na cjeloviti tekst rada:

Pristup cjelovitom tekstu rada

Citiraj ovu publikaciju:

Itrić Ivanda, Katarina; Vukoje, Marina; Kulčar, Rahela; Cigula, Tomislav; Jakopčević, Zrinka
Reproduction Quality of Thermochromic Line Prints // 6th International Conference Materials Science & Engineering & 3rd International Conference on Functional Materials and Chemical Engineering
Dubai, Ujedinjeni Arapski Emirati: Coalesce Research Group, 2022. str. 101-101 (poster, međunarodna recenzija, sažetak, znanstveni)
Itrić Ivanda, K., Vukoje, M., Kulčar, R., Cigula, T. & Jakopčević, Z. (2022) Reproduction Quality of Thermochromic Line Prints. U: 6th International Conference Materials Science & Engineering & 3rd International Conference on Functional Materials and Chemical Engineering.
@article{article, author = {Itri\'{c} Ivanda, Katarina and Vukoje, Marina and Kul\v{c}ar, Rahela and Cigula, Tomislav and Jakop\v{c}evi\'{c}, Zrinka}, year = {2022}, pages = {101-101}, keywords = {thermochromic inks, print quality, line quality}, title = {Reproduction Quality of Thermochromic Line Prints}, keyword = {thermochromic inks, print quality, line quality}, publisher = {Coalesce Research Group}, publisherplace = {Dubai, Ujedinjeni Arapski Emirati} }
@article{article, author = {Itri\'{c} Ivanda, Katarina and Vukoje, Marina and Kul\v{c}ar, Rahela and Cigula, Tomislav and Jakop\v{c}evi\'{c}, Zrinka}, year = {2022}, pages = {101-101}, keywords = {thermochromic inks, print quality, line quality}, title = {Reproduction Quality of Thermochromic Line Prints}, keyword = {thermochromic inks, print quality, line quality}, publisher = {Coalesce Research Group}, publisherplace = {Dubai, Ujedinjeni Arapski Emirati} }




Contrast
Increase Font
Decrease Font
Dyslexic Font