Pregled bibliografske jedinice broj: 1226570
Simulation of First Layer Adhesion Errors in 3D printing
Simulation of First Layer Adhesion Errors in 3D printing // Proceedings of the 10 th International Scientific and Expert Conference TEAM 2022 / Damjanović, Darko ; Stojšić, Josip ; Mirosavljević, Krunoslav ; Sivrić, Hrvoje (ur.).
Slavonski Brod: Sveučilište u Slavonskom Brodu, 2022. str. 307-315 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 1226570 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Simulation of First Layer Adhesion
Errors in 3D printing
Autori
Šantak, Ivor ; Duspara, Miroslav ; Cumin, Josip ; Kovačević, Božidar ; Maglić, Leon ; Stoić, Antun
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
Proceedings of the 10 th International Scientific and Expert Conference TEAM 2022
/ Damjanović, Darko ; Stojšić, Josip ; Mirosavljević, Krunoslav ; Sivrić, Hrvoje - Slavonski Brod : Sveučilište u Slavonskom Brodu, 2022, 307-315
Skup
10th International Scientific and Expert Conference TEAM2022
Mjesto i datum
Slavonski Brod, Hrvatska, 21.09.2022. - 22.09.2022
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
First layer adhesion, 3D printing, 3D print quality, calibration, optimal 3D printing settings
Sažetak
The main purpose of this paper is to explore parameters that affect first layer adhesion to print bed by simulating errors. Research was conducted on modified Velleman K8200 3D printer. Prior to research, 3D model of low surface area object was made. Parameters used for research were : temperature of the nozzle, temperature of heated bed, 3D printing speed and nozzle height. After the research, it is concluded that higher nozzle and heated bed temperatures affects first layer adhesion in a positive way. Lower nozzle height and speed also increase first layer print quality.
Izvorni jezik
Engleski
POVEZANOST RADA
Ustanove:
Strojarski fakultet, Slavonski Brod
