Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 122627

Simulating Cycle Duration of Tower Cranes Operations


Brana, Petar; Čulo, Ksenija; Sigmund, Vladimir
Simulating Cycle Duration of Tower Cranes Operations // 12th International Conference on Flexible Automation and Intelligent Manufacturing / William. G. Sullivan ; Munir, Ahmad ; Dieter, Fichtner ; Wilfried, Sauer ; Gerald, Weigert ; Thomas, Zerna (ur.).
Dresden: Oldenbourg Verlag, Germany, 2002. str. 393-402 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 122627 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Simulating Cycle Duration of Tower Cranes Operations

Autori
Brana, Petar ; Čulo, Ksenija ; Sigmund, Vladimir

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
12th International Conference on Flexible Automation and Intelligent Manufacturing / William. G. Sullivan ; Munir, Ahmad ; Dieter, Fichtner ; Wilfried, Sauer ; Gerald, Weigert ; Thomas, Zerna - Dresden : Oldenbourg Verlag, Germany, 2002, 393-402

Skup
12th International Conference on Flexible Automation and Intelligent Manufacturing

Mjesto i datum
Dresden, Njemačka, 15.07.2002. - 17.07.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Modelling; Simulation; Optimatisation of Manufacturing Processes

Sažetak
The operation of a tower crane is characterized by cycles which occur in a specific order, but do not have a specified time of duration. The undefined time of duration of each transport subprocess is not completely chaotic and arbitrary, so that there is a possibility of estimating when the process will take place, and in turn, prognosing the duration of the cycle. The duration of the transporting cycle can be prognosed by combining analytical relations, proved empirically, with the technics of simulation on the basis of which the modelling of transport processes of tower cranes is made possible. The aim of the structural and quantitative analysis of tower crane transport processes is to examine the nature of the influences affecting the duration of each subprocess and to create the foundation for prognosing the duration of both the subprocess and the entire cycle. The duration of the cycle cannot be calculated by simply adding up the duration of each of the subprocesses because they occur at the same time and in the certain order within one cycle. Tower cranes are in operation for a relatively short period of time in a working shift, so that for example, according to that amounts to only about 30% of the available operational time. Studies have shown that the duration of the state in which cranes wait with loads or on loads is the same of greater than the duration of the state of transporting. The study gives a simulation model for determining the duration of the operating cycles of a tower crane as variable, accidental quantitites.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo, Ekonomija



POVEZANOST RADA


Projekti:
0149180
0149260

Ustanove:
Građevinski i arhitektonski fakultet Osijek

Profili:

Avatar Url Petar Brana (autor)

Avatar Url Vladimir Sigmund (autor)

Avatar Url Ksenija Čulo (autor)


Citiraj ovu publikaciju:

Brana, Petar; Čulo, Ksenija; Sigmund, Vladimir
Simulating Cycle Duration of Tower Cranes Operations // 12th International Conference on Flexible Automation and Intelligent Manufacturing / William. G. Sullivan ; Munir, Ahmad ; Dieter, Fichtner ; Wilfried, Sauer ; Gerald, Weigert ; Thomas, Zerna (ur.).
Dresden: Oldenbourg Verlag, Germany, 2002. str. 393-402 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Brana, P., Čulo, K. & Sigmund, V. (2002) Simulating Cycle Duration of Tower Cranes Operations. U: William. G. Sullivan, Munir, A., Dieter, F., Wilfried, S., Gerald, W. & Thomas, Z. (ur.)12th International Conference on Flexible Automation and Intelligent Manufacturing.
@article{article, author = {Brana, Petar and \v{C}ulo, Ksenija and Sigmund, Vladimir}, year = {2002}, pages = {393-402}, keywords = {Modelling, Simulation, Optimatisation of Manufacturing Processes}, title = {Simulating Cycle Duration of Tower Cranes Operations}, keyword = {Modelling, Simulation, Optimatisation of Manufacturing Processes}, publisher = {Oldenbourg Verlag, Germany}, publisherplace = {Dresden, Njema\v{c}ka} }
@article{article, author = {Brana, Petar and \v{C}ulo, Ksenija and Sigmund, Vladimir}, year = {2002}, pages = {393-402}, keywords = {Modelling, Simulation, Optimatisation of Manufacturing Processes}, title = {Simulating Cycle Duration of Tower Cranes Operations}, keyword = {Modelling, Simulation, Optimatisation of Manufacturing Processes}, publisher = {Oldenbourg Verlag, Germany}, publisherplace = {Dresden, Njema\v{c}ka} }




Contrast
Increase Font
Decrease Font
Dyslexic Font