Naslov
Influence of the cross wire welding parameters on the weld breaking force

Autori
Vrtovšnik, Domagoj ; Brčić, Marino

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, prošireni sažetak, znanstveni

Izvornik
10th ICCSM Book of Abstracts / Skozrit, Ivica ; Sorić, Jurica ; Tonković, Zdenko - Zagreb : Hrvatsko društvo za mehaniku (HDM), 2022, 273-274

Skup
10th International Congress of Croatian Society of Mechanic (ICCSM 2022)

Mjesto i datum
Pula, Hrvatska, 28.09.2022. - 30.09.2022

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Recenziran

Ključne riječi
cross wire welding, electric resistance welding, destructive testing, weld strength, breaking force

Sažetak
Electric resistance welding (ERW) is the welding process that involves passing of an electric current through the components with no filler material being used. In the production of the cross wire welded reinforced meshes corrosion resistance has important role. Every resistance welding causes expulsion of material. Too much expulsion creates welds that can't be adequatly protected against corrosion. If the expulsion amount can be controlled, satisfactory weld appearance can be achiveved. While the weld appearance is an important factor, weld strength can not be ignored. The aim of this reasarch is to find the correlation between welding parameters and the weld strenght in order to obtain the weld with satisfactory appearance and required strength. In this case, two steel wires of the same radii are joined together to form reinforcing wire mesh. Mesh production, where multiple welds are being produced at the same time has been described by both Bushell and Jordan.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti

POVEZANOST RADA