Pregled bibliografske jedinice broj: 1221242
Assessment of Area-Average Absorbed Power Density on Realistic Tissue Models at mmWaves
Assessment of Area-Average Absorbed Power Density on Realistic Tissue Models at mmWaves // Facing challenges in electromagnetic dosimetry at millimeter waves and THz
Suzhou, Kina: Institute of Electrical and Electronics Engineers (IEEE), 2022. str. 153-155 doi:10.1109/imbioc52515.2022.9790150 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1221242 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Assessment of Area-Average Absorbed Power Density on Realistic Tissue Models at mmWaves
Autori
Lojic Kapetanovic, Ante ; Sacco, Giulia ; Poljak, Dragan ; Zhadobov, Maxim
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Facing challenges in electromagnetic dosimetry at millimeter waves and THz
/ - : Institute of Electrical and Electronics Engineers (IEEE), 2022, 153-155
Skup
IEEE International Microwave Biomedical Conference (IMBioC 2022)
Mjesto i datum
Suzhou, Kina, 16.05.2022. - 18.05.2022
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
computational dosimetry ; millimeter wave exposure ; ear model ; absorbed power density
Sažetak
Currently, most state-of-the-art research in computational dosimetry utilizes flat-surface tissue models to simplify the problem geometry and thus mitigate computational complexity. However, depending on the ratio of the penetration depth and the curvature radius, this may lead to a non-correct estimation of the power absorbed by the tissues due to constructive/destructive interference. In this study, we propose an accurate evaluation of the area-average absorbed power density in curved tissue-equivalent models by computing the surface integral of the normal component of the absorbed power density vector field. The numerical analysis is performed for plane wave exposure of an ear model at 60 GHz. We also investigate the effect of the averaging area shape on the absorbed power density by considering 1 cm 2 square- and disk-shaped averaging surfaces. Results show a substantial relative difference of 14 % in the area-averaged absorbed power density over a disk-shaped averaging surface between transverse electric and magnetic polarization, with the reference being the value of the area-averaged absorbed power density for a planar homogeneous model and normal incidence. By using the same reference value, negligible differences of 1.81 % and 0.92 % for transverse electric and magnetic polarization, respectively, are present when the averaging area shape changes. According to the studied exposure scenarios, the area-averaged absorbed power density variations as a function of the averaging surface geometry are less significant than those related to the polarization of the incident field.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split