Naslov
Applicability of polymers printed on textiles with a 3D printer for possible use in car interior

Autori
Ercegović Ražić, Sanja ; Ludaš Anja ; Kaurin Tea ; Zonjić Tin

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, neobjavljeni rad, znanstveni

Skup
27th Scientific Conference of the Faculty of Power Engineering and Power Machines at Technical University of Sofia

Mjesto i datum
Sozopol, Bugarska, 16.09.2022. - 19.09.2022

Vrsta sudjelovanja
Plenarno

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
3D printing, polymers, applicability on textile, abrasion resistance, strip test, wear resistance, ageing of the polymer

Sažetak
In the paper, different types of polymers (rPLA, PETG, TPU) printed with a 3D printer are tested on textile material used for car interiors. The primary goal is to examine the possibility of 3D printing on textiles for the automotive industry, its adhesive and other mechanical properties. A further goal is to explore possibilities for new ways of designing and aesthetic efficiency of materials used in vehicles as well as potential ergonomically positive effects. The adhesion properties of the polymer-textile material, the strength printed on the surface using the strip method, the wear resistance of the polymer printed on the textile and the ageing of the polymer under simulated conditions are tested. The results are used to select a suitable polymer for the 3D printer and print it on the selected textile material for automotive industry.

Izvorni jezik
Engleski

Znanstvena područja
Tekstilna tehnologija

POVEZANOST RADA