Pregled bibliografske jedinice broj: 1218999
ANALYSIS OF THE STATODYNAMIC LOAD ON WORKERS USING THE RULA METHOD IN THE TECHNOLOGICAL SEWING PROCESS
ANALYSIS OF THE STATODYNAMIC LOAD ON WORKERS USING THE RULA METHOD IN THE TECHNOLOGICAL SEWING PROCESS // 8th International Professional and Scientific Conference Occupational Safety and Health / Kirin, Snježana ; Štedul, Ivan ; Bubaš, Marija (ur.).
Karlovac: Veleučilište u Karlovcu, 2022. str. 432-441 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1218999 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
ANALYSIS OF THE STATODYNAMIC LOAD ON WORKERS USING
THE RULA METHOD IN THE TECHNOLOGICAL SEWING PROCESS
Autori
Kirin, Snježana ; Hursa Šajatović, Anica ; Todorović, Marijana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
8th International Professional and Scientific Conference Occupational Safety and Health
/ Kirin, Snježana ; Štedul, Ivan ; Bubaš, Marija - Karlovac : Veleučilište u Karlovcu, 2022, 432-441
Skup
8. međunarodni stručno-znanstveni skup "Zaštita na radu i zaštita zdravlja"
Mjesto i datum
Zadar, Hrvatska, 21.09.2022. - 24.09.2022
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
technological process of garment sewing, RULA method, work load
Sažetak
In the technological sewing process, the work is performed in a sitting position, whereas the worker uses the trunk and the hands to handle workpieces, and the feet to control the sewing machine speed. When performing technological sewing operations at the sewing machine, the worker often performs work in a forced posture of the body and head, which leads to non- physiological sitting, isometric load on the lower limbs and significant load on the hands and fingers. An unfavourable working posture leads to load, fatigue and diseases of the musculoskeletal system. By using the ErgoFellow computer system RULA module (Rapid Entire Body Assessment) the working postures of the worker performing the technological operation of sewing the back and front part of the men's jacket in the real production process were analysed. The analysis revealed that the body loads were caused by unfavourable working postures. The results obtained by the analysis indicate the presence of increased forward flexion of the spine and head in certain technological procedures and the load on the upper arm-forearm-hand system. A proposal was made to redesign the existing workplace, which would reduce workload and fatigue and increase productivity.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb,
Veleučilište u Karlovcu