Naslov
Corrosion Behavior of Different Types of Stainless Steel in PBS Solution

Autori
Gudić, Senka ; Nagode, Aleš ; Šimić, Kristina ; Vrsalović, Ladislav ; Jozić, Sonja

Izvornik
Sustainability (2071-1050) 14 (2022); 8935, 19

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
stainless steel ; phosphate buffer solution ; pitting corrosion ; spontaneous corrosion ; oxide film

Sažetak
Anodic and spontaneous corrosion of different types of stainless steel (AISI 304L, AISI 316L and 2205 DSS) in phosphate-buffered saline solution (PBS, pH = 7.4) at 37 oC (i.e. in simulated physiological solution in the human body) were examined using open circuit potential measurements, linear and cyclic polarization and electrochemical impedance spectroscopy methods. After the anodic and spontaneous corrosion, the surface of the tested samples was investigated by light and scanning electron microscopy (SEM) with EDS analysis. It has been established that the tendency of the examined steel materials towards local corrosion increases in order: AISI 304L  AISI 316L  2205 DSS. Namely, the possibility of repassivation and the resistance to local corrosion increases in the same order. The corrosion resistance of steel samples at open circuit potential is a consequence of forming a natural oxide film with a bi-layer structure and consists of an inner barrier and an outer porous film. The inner barrier film has a small thickness and extremely high resistance, while the outer porous film is much thicker but also has significantly lower resistance. The inner barrier layer mainly prevents corrosion of examined steel samples in order: AISI 304L  AISI 316L  2205 DSS. Light microscopy and SEM/EDS analysis after pitting and spontaneous corrosion showed damage on the AISI 304L and AISI 316L surface, while the surface of 2205 DSS was almost undamaged by corrosion.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Strojarstvo

POVEZANOST RADA