Pregled bibliografske jedinice broj: 1215749
Dielectric Permittivity Measurement Using Open-Ended Coaxial Probe — Modeling and Simulation Based on the Simple Capacitive-Load Model
Dielectric Permittivity Measurement Using Open-Ended Coaxial Probe — Modeling and Simulation Based on the Simple Capacitive-Load Model // Sensors, 22 (2022), 16; 6024, 28 doi:10.3390/s22166024 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1215749 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Dielectric Permittivity Measurement Using Open-Ended Coaxial Probe — Modeling and Simulation Based on the Simple Capacitive-Load
Model
Autori
Šarolić, Antonio ; Matković, Anđela
Izvornik
Sensors (1424-8220) 22
(2022), 16;
6024, 28
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
dielectric permittivity measurement ; open-ended coaxial probe ; electromagnetic modeling and simulation ; capacitive-load model ; sodium chloride (NaCl) water solution ; saline ionic conductivity ; physiological saline ; CST ; FEKO ; reflection coefficient de-embedding ; microwave frequency range
Sažetak
The study aim was to validate that dielectric permittivity measurement using the open-ended coaxial probe can be reliably modeled using electromagnetic modeling and simulations, followed by the postprocessing calculations based on the simple capacitive-load model. Saline solutions with various NaCl concentrations were used as materials under test (MUTs) to investigate how ionic conductivity affects the model validity. Two different solvers and simulation methods were used: FEKO for the frequency domain and CST for the time domain. Furthermore, we performed physical experiments with the same probe and MUTs, again implementing the capacitive-load model on the measurement data to observe the model validity. Relative error of the capacitive-load model with respect to the reference permittivity values, both in measurements and simulations, was within 10% for all cases except for the measured ε′r of 1M solution at the lowest frequencies. The model yielded average relative errors well below 1% for the physiological saline, which is relevant for biological materials. The error increased for higher concentrations and for the lowest simulated frequencies but was within the declared measurement accuracy of the probe itself. This makes the simple capacitive-load model valid for all analyzed concentrations in the microwave frequency range from 0.5 to 18 GHz.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
- MEDLINE