Pregled bibliografske jedinice broj: 12121
Green's functions for corrugated surface derived by asymptotic corrugation boundary conditions
Green's functions for corrugated surface derived by asymptotic corrugation boundary conditions // Proceedings of IEEE Antennas and Propagation Society International Symposium / Moellers, Jon (ur.).
Baltimore (MD): Institute of Electrical and Electronics Engineers (IEEE), 1996. str. 322-325 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 12121 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Green's functions for corrugated surface derived by asymptotic corrugation boundary conditions
Autori
Šipuš, Zvonimir ; Kildal Per-Simon
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of IEEE Antennas and Propagation Society International Symposium
/ Moellers, Jon - Baltimore (MD) : Institute of Electrical and Electronics Engineers (IEEE), 1996, 322-325
Skup
IEEE Antennas and Propagation Society International Symposium
Mjesto i datum
Baltimore (MD), Sjedinjene Američke Države, 21.06.1996. - 26.06.1996
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
corrugated surface; Green's functions
Sažetak
The Green's functions for corrugated surfaces have been derived by using the asymptotic corrugation boundary conditions. The assumption is that the periodicity of the corrugations are small compared to the wavelength. The Green's functions are derived in the spectral domain. The poles of the spectral Green's functions give the information about surface waves. In a wide frequency range there is no surface waves in the direction transverse to the corrugations. At central frequency the surface wave is strongly localized in and propagating along the corrugations passing near the source, and its magnitude does not decay with distance. For other frequencies the surfaces waves spread and their magnitude decay. The presented Green's functions are helpful in analyzing plane corrugated surfaces when the plane wave model is not sufficient, e.g. when the source is near the surface.
This paper is done while Zvonimir Sipus was a Ph.D. Student at Chalmers University of Technology, Gothenburg, Sweden
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Projekti:
036028
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
Profili:
Zvonimir Šipuš
(autor)