Pregled bibliografske jedinice broj: 1211487
Study of predicting the number of warp thread breaks during the weaving process
Study of predicting the number of warp thread breaks during the weaving process // Textile research journal, 92/93 (2022), First Published 5 Jul 2022; 1-20 doi:10.1177/00405175221112399 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1211487 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Study of predicting the number of warp thread breaks
during the weaving process
Autori
Kovačević, Stana ; Schwarz, Ivana ; Brnada, Snježana
Izvornik
Textile research journal (0040-5175) 92/93
(2022), First Published 5 Jul 2022;
1-20
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Number of warp thread breaks, yarn characteristics, yarn breaking forces, dynamic forces in the weaving process, intersection area, normal distribution, χ2-test
Sažetak
The properties of cotton yarn which will be used as the warp were investigated before the weaving process. The results of the breaking forces served to make an empirical and approximated diagram of the normal distribution. Yarn tests were performed by yarn passing through a weaving process simulator with electronic force measurement, speed, and the number of wefts. The number of breaks was registered during the yarn test. Measurements were performed simulating different conditions of the weaving process (change in reed density, higher dynamic tensile forces, lower dynamic tensile forces, and shed height changes). Data computer processing gave approximate diagrams of dynamic forces normal distribution under the test conditions, which do not show significance according to the χ2-test. By pairing a diagram of the breaking force and a diagram of one of the conditions in the weaving process, shown in the same line of forces, their intersection or surfaces overlap is expressed. Based on the integration of the intersection area of the breaking forces approximated diagrams and dynamic forces in the weaving process, the value of the intersection area according to the test conditions was obtained. A high degree of correlation was found by correlating the actual number of thread breaks registered at the time of testing and the intersection of areas for the corresponding condition. This makes it possible to predict the number of breaks in the warp threads during the weaving process if the yarn characteristics and the weaving conditions are known.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
--IP-2018-01-3170 - Multi-funkcionalni tkani kompoziti za toplinsku zaštitnu odjeću (MF-WCOMPROTECT) (Kovačević, Stana) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus