Naslov
Analysis of Aluminium Foam Pore Size by Computed Tomography

Autori
Rodinger, Tomislav ; Ćorić, Danko ; Kurtalj, Luka

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Conference Proceedings of 22nd International Conference on Materials, Tribology and Recycling - MATRIB 2022 / Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado - Zagreb : Hrvatsko društvo za materijale i tribologiju (HDMT), 2022, 378-384

Skup
22nd International Conference on Materials (MATRIB 2022)

Mjesto i datum
Vela Luka, Hrvatska, 30.06.2022. - 02.07.2022

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
aluminium foam ; computed tomography ; morphology

Sažetak
Aluminium foams are highly porous material whose properties are highly dependent on the shape and size of the pores. Production processes are still not perfected, resulting in pores of uneven shape and size, which worsens their mechanical properties. In order to gain insight into the internal structure of foamed aluminium, i.e. to find out the arrangement of the shape and size of the pores, the sample needs to be cut, which actually leads to its destruction and the impossibility of conducting further mechanical tests. To avoid this, analysis of the arrangement and size of the pores is performed using computed tomography (CT), which involves scanning the sample using X-rays to obtain a three-dimensional model of the foam. This paper describes the procedure of scanning aluminium foam by computed tomography as well as cross-sectional analysis of a threedimensional model.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA