Pregled bibliografske jedinice broj: 120400
On the use of pulsed microbeam in IBIC
On the use of pulsed microbeam in IBIC // Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms, 210 (2003), 176-180 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 120400 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
On the use of pulsed microbeam in IBIC
Autori
Jakšić, Milko ; Medunić, Zvonko ; Skukan, Natko
Izvornik
Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms (0168-583X) 210
(2003);
176-180
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
microbeam; IBIC
Sažetak
In order to expand the application possibilities of ion beam induced charge (IBIC) technique to a wider range of semiconductor materials and devices, three novel modes of measurements have been developed. The fast beam deflector was used to produce ns pulses of single ions and the trigger signal provides a time scale for time resolved IBIC measurements. Longer pulses (>100 ns) containing tens or hundreds of ions were used to enhance IBIC signals in materials with poor charge transport properties. Continuous beam current (10 pA to 1 nA) of 3 MeV protons was used to measure ion beam induced voltage (IBIV) in thin amorphous silicon films. In these samples it was possible to correlate the charge collection properties with elemental distribution measured simultaneously with PIXE. Radiation damage was shown to be negligible for doses below 10^7 protons micro m-2.
Izvorni jezik
Engleski
Znanstvena područja
Fizika
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus