Pregled bibliografske jedinice broj: 1203585
The Influence of Self-adhesive Substrates on the Realization of Achromatic Label Created by UV Inkjet
The Influence of Self-adhesive Substrates on the Realization of Achromatic Label Created by UV Inkjet // Conference Proceedings 22th International Conference on Materials, Tribology & Recycling MATRIB 2022 / Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado (ur.).
Varaždin: Hrvatsko društvo za materijale i tribologiju (HDMT), 2022. str. 318-328 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1203585 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Influence of Self-adhesive Substrates on the Realization of
Achromatic Label Created by UV Inkjet
Autori
Parlov, Ivan ; Majnarić, Igor ; Bauk, Stanko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Conference Proceedings 22th International Conference on Materials, Tribology & Recycling MATRIB 2022
/ Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado - Varaždin : Hrvatsko društvo za materijale i tribologiju (HDMT), 2022, 318-328
Skup
22nd International Conference on Materials (MATRIB 2022)
Mjesto i datum
Vela Luka, Hrvatska, 30.06.2022. - 02.07.2022
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
label printing, UV Inkjet, CIE LAB DE, resolution profile
Sažetak
Compared with commercial printing products, current trends in label production are very optimistic. New self-adhesive materials (printing substrates) can be used in various industrial areas. When printing labels with UV Inkjet inks, they enable high-quality printing and are becoming a more and more common option. In this paper, the reproduction quality of achromatic tones for three characteristic self- adhesive products was examined (wine label, polypropylene label, and label with thermosensitive coating intended for additional printing in thermal printers). The high-performance UV Inkjet machine Durst Tau 330 RSC, which uses a special black-ink TAU RSC UV, was used for experimental printing. All obtained samples will be compared with reference values (FOGRA 39) where Fogra Media Wedge was measured. The measuring device used an x-rite Exact colorimeter which gave CIE LAB values were precisely determined and the colorimetric differences ΔE, ΔL, and ΔC were calculated. Additionally, image analysis was performed, as well as quality analysis of the printing system resolution (resolution profile size 8 x 5 mm). For this PIAS-II system will be used. Based on the obtained results, Polypropylene self-adhesive printing substrate proved to be the best and Avery the worst. The realized difference between Polypropylene and Avery was large ΔEPP-Avery = 4.62.
Izvorni jezik
Engleski
Znanstvena područja
Grafička tehnologija
POVEZANOST RADA
Ustanove:
Grafički fakultet, Zagreb