Pregled bibliografske jedinice broj: 1196305
Electronic unit for controlling the operation of the device with a flooded evaporator
Electronic unit for controlling the operation of the device with a flooded evaporator // MIPRO 2022 45th Jubilee International Convention Proceedings / Skala, Karolj (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2022. 907, 912 doi:10.23919/MIPRO55190.2022.9803502 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 1196305 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Electronic unit for controlling the operation of
the device with a flooded evaporator
Autori
Cvitaš, Ljubivoj ; Vuletić Komljen, Branimir ; Špoljarić, Tomislav ; Miletić, Marko ; Malčić, Goran
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
MIPRO 2022 45th Jubilee International Convention Proceedings
/ Skala, Karolj - Rijeka : Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2022
Skup
45th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2022)
Mjesto i datum
Opatija, Hrvatska, 23.05.2022. - 27.05.2022
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
electronic circuit, laboratory model, flooded evaporator, beer cooling
Sažetak
Flooded evaporator is one of the physical ways in which thermal energy can be exchanged between a cooled medium and refrigerated medium, but which is rarely used due to management issues. This paper presents the design of an electronic control unit for controlling the operation of a cooling device based on flooded evaporator technology, and for the purpose of flow cooling juices and beer. Sensor and actuator equipment for control and acquisition of process information is installed on a real laboratory model. The control electronic circuit is designed so that the control of system operation and acquisition of sensor values can be performed via a computer program MATLAB Simulink and parallel via an internal application in the microcontroller. The model is equipped with several various sensors (temperature, pressure, flow) and actuators (fluid solenoid valves, condenser fan, frequency- controlled compressor) and as a result a microcontroller system was developed as a signal interface between the Simulink acquisition card and the physical model. Experimental methods lead to optimal control and regulation algorithms applicable in the later phase of industrial design of the complete device.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika, Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Tehničko veleučilište u Zagrebu
Profili:
Ljubivoj Cvitaš
(autor)
Branimir Vuletić Komljen
(autor)
Goran Malčić
(autor)
Tomislav Špoljarić
(autor)