Pregled bibliografske jedinice broj: 11920
Radiation properties of two-element active patch arrays: comparison between calculated and measured results
Radiation properties of two-element active patch arrays: comparison between calculated and measured results // Proceedings of the 40th International Symposium Electronics in Marine - ELMAR / Radanović, Božidar ; Jerič, Viljem (ur.).
Zadar: Hrvatsko društvo Elektronika u pomorstvu (ELMAR), 1998. str. 159-165 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 11920 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Radiation properties of two-element active patch arrays: comparison between calculated and measured results
Autori
Bonefačić, Davor ; Šipuš, Zvonimir ; Bartolić, Juraj
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 40th International Symposium Electronics in Marine - ELMAR
/ Radanović, Božidar ; Jerič, Viljem - Zadar : Hrvatsko društvo Elektronika u pomorstvu (ELMAR), 1998, 159-165
Skup
40th International Symposium Electronics in Marine - ELMAR
Mjesto i datum
Zadar, Hrvatska, 23.06.1998. - 25.06.1998
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
active antenna; microstrip antenna; beam scanning; active patch array
Sažetak
Mutually coupled active oscillating patches integrated in an array offer beam scanning capabilities. In this paper two-element active patch arrays have been investigated. The radiation patterns have been calculated by using the cavity model, simple Green's function model and a rigorous commercial electromagnetic simulator. Two modified active rectangular patches with a Gunn diode were integrated in arrays in E and H plane. The calculated and measured results for these two active arrays have been compared. Beam scanning capabilities have been demonstrated for both arrays. All three models predicted reasonably well the radiation patterns in the whole steering range. A thin dielectric slab was placed in front of the H plane array to achieve stable operation. The influence of the dielectric slab position on even and odd array operating modes has been demonstrated.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika