Pregled bibliografske jedinice broj: 1190713
Influence of cotton cationization on pigment layer characteristics in digital printing
Influence of cotton cationization on pigment layer characteristics in digital printing // Book of abstracts, 14th International Scientific – Professional Symposium, Transfer of innovations to the economy / Sutlović, Ana ; Firšt Rogale, Snježana (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2022. str. 17-17 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1190713 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of cotton cationization on pigment layer
characteristics in digital printing
Autori
Glogar, Martinia Ira ; Tarbuk, Anita ; Dekanić, Tihana ; Čorak, Ivana ; Labazan, Petra
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of abstracts, 14th International Scientific – Professional Symposium, Transfer of innovations to the economy
/ Sutlović, Ana ; Firšt Rogale, Snježana - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2022, 17-17
Skup
14th scientific-professional symposium Textile science and economy
Mjesto i datum
Zagreb, Hrvatska, 26.01.2022
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
inkjet printing ; cationization ; cotton ; pigment ; wash fastness ;
Sažetak
The paper examines the influence of cotton cationization on the print quality in terms of penetration, colour yield and colour depth, which have been analysed in comparison to cotton untreated and pretreated with conventional acrylate binder. The process of cationization during mercerization was performed with a cationizing agent Rewin DWR (CHT Bezema). Standard (noncationized) and cationized fabric, with and without additional layering of binder have been printed by digital inkjet pigment printing method. Moisture management testing (MMT) and dynamic contact angle measurement (drop shape analyzer– DSA30S) were performed on standard and cationized fabric, with and without binder, both with and without pigment layer. After printing, the objective values of colour depth (K/S) and colour parameters L*, C* and h° were analysed. The samples were also analysed by the method of microscopic imaging using a DinoLite microscope. Printed samples were tested to washing fastness, and the results are presented in terms of total colour difference (dECMC), according to CMC(l:c) equation, after the 1st, 3rd, 5th, 7th and 10th washing cycles. Results showed that the cotton cationization will improve the uniformity and coverage of the printed area as well as increase the K/S value. For the samples with binder, the positive effect of cationization on the stability and bond strength between the polymer layer as a pigment carrier with the cotton fabric was confirmed.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
HRZZ-UIP-2017-05-8780 - Bolničke zaštitne tekstilije (HPROTEX) (Flinčec Grgac, Sandra, HRZZ - UIP-2017-05) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb
Profili:
Anita Tarbuk
(autor)
Ivana Čorak
(autor)
Tihana Dekanić
(autor)
Martinia Ira Glogar
(autor)