Naslov
Application of sensors based on the Arduino system in the process of bio-drying of municipal solid waste

Autori
Bosilj, Dino ; Petrović, Igor ; Hrncic, Nikola ; Kaniski, Nikola

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
International E-Conference on Waste Management and Renewable Energy Resource / - London : Delhi : United Research Forum, 1-75 Shelton Street Garden, 2021, 21-21

Skup
International E-Conference on Waste Management and Renewable Energy Resource

Mjesto i datum
London, Ujedinjeno Kraljevstvo, 02.12.2021. - 03.12.2021

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Podatak o recenziji nije dostupan

Ključne riječi
bio-drying, arduino, sensors

Sažetak
This paper presents usage of Arduino based sensors in the laboratory simulation of the biodrying process. Biodrying process use generated heat, caused by forced aeration and aerobic decomposition of organic matter, to dry and stabilize organic matrix. In order to optimize biodrying process, several parameters that affects the process has to be monitored. Those are: air humidity, air temperature, air flow rate and CO2 concentration at the inlet and outlet of the bioreactor cell. In addition, the humidity, temperature and displacements of the organic matrix should also be recorded. While commercial sensors are easily available, low costs of Arduino based sensors makes them a vialable alternative. It will be demonstrated how to adjust and set-up Arduino DHT22, BMP180, MQ-135, CJMCU-811, SHARP GP2Y0A41SK0F, DS18B20, JQC-3FF-SF sensors and switches in order to obtain self-operating biodrying process with continuous data logging. In addition, the results of the single biodrying trial test will be briefly presented.

Izvorni jezik
Engleski

POVEZANOST RADA