Pregled bibliografske jedinice broj: 1188165
The Effect of Al/Mn Content on the Thermodynamic Parameters of Cu-Al-Mn Alloys
The Effect of Al/Mn Content on the Thermodynamic Parameters of Cu-Al-Mn Alloys // Book of Abstracts - 4th Central and Eastern European Conference on Thermal Analysis and Calorimetry
Kišinjev, Moldavija, 2017. str. 1-1 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1188165 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Effect of Al/Mn Content on the Thermodynamic
Parameters of Cu-Al-Mn Alloys
Autori
Holjevac Grgurić, Tamara ; Kožuh, Stjepan ; Ivanić, Ivana ; Manasijević, Dragan ; Balanović, Ljubiša ; Gojić, Mirko
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of Abstracts - 4th Central and Eastern European Conference on Thermal Analysis and Calorimetry
/ - , 2017, 1-1
Skup
4th Central and Eastern European Conference on Thermal Analysis and Calorimetry
Mjesto i datum
Kišinjev, Moldavija, 28.08.2017. - 31.08.2017
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
SMA alloys, Cu-Al-Mn, thermodynamic modelling
Sažetak
Understanding and control of chemical composition is one of the most important factors for practical application of Cu-Al-Mn shape memory alloys [1]. Microstructure and phase transformation temperatures of Cu-Al-Mn alloys are very sensitive on content of components and even slightly changes can significantly shift transformation temperatures as well as prevent shape memory properties [2-4]. In this work, an attempt has been made to study of influence of different Al/Mn ratio on the thermodynamic properties and changes in phase transformation temperatures of Cu-Al-Mn alloys. Cu-Al-Mn specimens were prepared by melting in the electric-arc furnace and casted in the cylindrical moulds with =6mm. Alloys were homogenised at different temperatures and quenched in the water. Microstructure of as-cast state and heat-treated state of Cu-Al-Mn were followed by optical microscopy and scanning electron microscopy. The influence of alloy content on the transformation temperatures was carried out by simultaneous thermal analysis, STA DSC/TG.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo, Metalurgija
POVEZANOST RADA
Ustanove:
Metalurški fakultet, Sisak