Pregled bibliografske jedinice broj: 1179332
Research of Working Postures in the Technological Sewing Process Using the REBA Method
Research of Working Postures in the Technological Sewing Process Using the REBA Method // Proceedings of the 8th International Ergonomics Conference - ERGONOMICS 2020 - Advances in Intelligent Systems and Computing / Sumpor, Davor ; Jambrošić, Kristian ; Jurčević Lulić, Tanja ; Milčić, Diana ; Salopek Čubrić, Ivana ; Šabarić, Irena (ur.).
Zagreb, Hrvatska: Springer, 2021. str. 111-119 doi:10.1007/978-3-030-66937-9_13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1179332 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Research of Working Postures in the Technological
Sewing Process Using the REBA Method
Autori
Kirin, Snježana ; Hursa Šajatović, Anica
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 8th International Ergonomics Conference - ERGONOMICS 2020 - Advances in Intelligent Systems and Computing
/ Sumpor, Davor ; Jambrošić, Kristian ; Jurčević Lulić, Tanja ; Milčić, Diana ; Salopek Čubrić, Ivana ; Šabarić, Irena - : Springer, 2021, 111-119
ISBN
978-3-030-66936-2
Skup
8th International Ergonomics Conference - Ergonomics 2020
Mjesto i datum
Zagreb, Hrvatska, 02.12.2020. - 05.12.2020
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
REBA method ; Technological process of sewing ; Worker workload
Sažetak
The characteristics of the work in the technological sewing process depend on the type and character of the workpiece, the type of the sewing machine used to perform the technological operation, as well as on the training and skills of the worker. In the technological sewing process, the work is performed in a sitting position at the sewing machine, whereby the worker performs hand and/or machine-hand technological suboperations. During the performing of technological operations, the worker uses her hands and torso to handle the workpiece, and the feet to operate the sewing machine pedal at short intervals with continuous repetition throughout the work shift, subjecting the worker to stress. The paper analyses the working position at nine workplaces in the technological sewing process using the REBA method (Rapid Entire Body Assessment). The analysis of the results showed that there is workload (medium or high risk) at all workplaces that requires workplace adaptation in the form of workplace redesign. The redesign of workplaces involves adapting the dimensions of the workplace to the worker’s height and determining a more favourable working method that achieves a lower workload.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb,
Veleučilište u Karlovcu
