Naslov
Research of Strength, Frost Resistance, Abrasion Resistance and Shrinkage of Steel Fiber Concrete for Rigid Highways and Airfields Pavement Repair

Autori
Kos, Željko ; Kroviakov, Sergii ; Kryzhanovskyi, Vitalii ; Grynyova, Iryna

Izvornik
Applied Sciences (2076-3417) 12 (2022), 3; 12031174, 14

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
fiber-reinforced concrete ; road pavement ; hardening accelerator ; repair ; shrinkage ; abrasion

Sažetak
High-early strength fiber-reinforced concretes are effective materials for the full depth repair of rigid highway and airfield pavements. A comprehensive study was carried out on the influence of the amount of steel anchor fiber and hardening accelerator on properties that are important for repairing concrete. A two-factor experiment was carried out, in which the influence of the hardening accelerator and fiber dosages on the strength, frost resistance, wear resistance and shrinkage of repaired steel-fiber-reinforced concrete for rigid pavements was studied. The investigated concretes contained 400 kg/m3 of cement and polycarboxylate plasticizer in the amount of 1.2% of the cement content. It has been established that the optimal concrete compositions are with the amount of Sika Rapid 3 hardening accelerator from 1 to 2% of the cement content and the steel fiber amount from 60 to 90 kg/m3. Optimal fiber-reinforced concrete compositions have a reduced shrinkage during hardening, and at the age of 2 days they have a compressive strength of at least 55 MPa and a flexural strength of at least 8.5 MPa. At the design age, the fiber- reinforced concrete compressive strength is 85–90 MPa, its flexural strength ranges from 15.5 to 17.5 MPa, it has a frost resistance of F200 and abrasion not higher than 0.24 g/cm2. These properties ensure the high durability of the repair material

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo, Interdisciplinarne tehničke znanosti

POVEZANOST RADA