Pregled bibliografske jedinice broj: 1162832
Influence of the addition of surfactants in iron oxide microwave synthesis
Influence of the addition of surfactants in iron oxide microwave synthesis // Journal of Materials Engineering and Applications, vol 5
online, 2021. str. 26-26 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1162832 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of the addition of surfactants in iron
oxide microwave synthesis
Autori
Mitar, Ivana ; Vrankić, Martina ; Krehula, Stjepko ; Prkić, Ante ; Paut, Andrea ;
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Journal of Materials Engineering and Applications, vol 5
/ - , 2021, 26-26
Skup
4th International Webinar on Materials Chemistry
Mjesto i datum
Online, 21.10.2021. - 21.10.2021
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
microwave synthesis ; iron oxide nanoparticles
Sažetak
Microwave-assisted hydrothermal synthesis is a method that has been increasingly used in the last decade, mainly because of the reduction in synthesis time, repeatability, and the ability to control the main parameters for iron oxide synthesis. Since nanoparticles of iron oxides are widely used in many scientific and industrial fields such as medicine, industry and biotechnology as inorganic pigments, adsorbents for wastewater treatment, catalysts, electrochemical sensors and medical diagnostics or therapy, there is a growing interest in the preparation of iron oxide nanoparticles with different properties required for various applications. This method was used for the synthesis of hematite (α- Fe2O3) and goethite (α- FeOOH) in highly alkaline media with iron(III) chloride (FeCl3) as precursor under continuous microwave emission of 850 W at 200 °C for 20 min. The main goal of this research was to investigate the influence of different types of surfactants, such as polyethylene glycol (PEG), N-guanylurea sulfate (NGS) and sodium dodecyl sulfate (SDS) on the shape, size and composition of the final product. Also, addition of different percentages of mentioned surfactants in the reaction mixture were investigated. The nanoparticles were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Powder X-ray Diffraction (PXRD) followed by Rietveld analysis and a Field Emission Scanning Electron Microscope (FE - SEM) was used to determine the size and shape of the nanoparticles. It was found that the samples precipitated without surfactants were pure hematite, while the samples to which surfactants were added gave a different final product and nanoparticle size and shape.
Izvorni jezik
Engleski
Znanstvena područja
Kemija
POVEZANOST RADA
Projekti:
HRZZ-UIP-2017-05-6282 - Razvoj novih membrana za ionsko-selektivne elektrode s dodatkom nanočestica metala i metalnih oksida (NANOISEM) (Prkić, Ante, HRZZ ) ( CroRIS)
HRZZ-IP-2016-06-8254 - Nastajanje i svojstva 1D α-Fe2O3 nanostruktura dopiranih odabranim metalnim ionima (1D-DopedFeOX) (Krehula, Stjepko; Ristić, Mira, HRZZ ) ( CroRIS)
Ustanove:
Kemijsko-tehnološki fakultet, Split,
Institut "Ruđer Bošković", Zagreb,
Prirodoslovno-matematički fakultet, Split
Profili:
Ivana Mitar
(autor)
Martina Vrankić
(autor)
Stjepko Krehula
(autor)
Andrea Paut
(autor)
Ante Prkić
(autor)