Naslov
Analysis of metal polymer interface using image analyser

Autori
Vojvodić, Denis ; Čelebić, Asja ; Jerolimov, Vjekoslav ; Ćatović, Adnan ; Husić, Šuhreta ; Indof, Janez

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, kratko priopćenje, znanstveni

Izvornik
Proceedings 11th International Symposium on Biomedical Engineering '96 / - Zagreb : Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 1996, 67-70

ISBN
953-6037-21-X

Skup
11th International Symposium on Biomedical Engineering

Mjesto i datum
Zagreb, Hrvatska, 07.11.1996. - 09.11.1996

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
image analyser ; dental materials ; marginal gap ; bonding system

Sažetak
Research projects in a field of dental materials can not be realised without support of a modern microscopy. For a most widely used SEM microscopy samples should be electrically conductive. If not, such samples (e.g. dental veneering materials) should be sputter coated to become visible, but this procedure is time and money consuming. Light microscopy and image analyser Leco L2001 were used to investigate the rise of marginal gap between metal surface and composite veneer. Samples were analyzed after storage in distilled water temperature 37oC for 28 days and thermocycling. Considering the accuracy of the data obtained it can be concluded that image analyser is a device of a great help in dental materials research, and three bonding systems (of four investigated) obstructed the rise of marginal gap thus justifying their use in dental practice.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Dentalna medicina

POVEZANOST RADA