Pregled bibliografske jedinice broj: 1158964
Influence of the reaction parameters on the synthesis of fatty acid isopentyl esters
Influence of the reaction parameters on the synthesis of fatty acid isopentyl esters // Environmental resources, sustainable development and food production – OPORPH 2021: Book of Abstracts / Ćatić, Sead ; Begić, Sabina ; Andrejaš, Franc (ur.).
Tuzla: Tehnološki fakultet Univerziteta u Tuzli, 2021. str. 18-18 doi:10.5281/zenodo.5656338 (poster, domaća recenzija, sažetak, znanstveni)
CROSBI ID: 1158964 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of the reaction parameters on the
synthesis of fatty acid isopentyl esters
Autori
Gotovuša, Mia ; Žuvić, Iva ; Parlov-Vuković, Jelena ; Konjević, Lucija ; Faraguna, Fabio
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Environmental resources, sustainable development and food production – OPORPH 2021: Book of Abstracts
/ Ćatić, Sead ; Begić, Sabina ; Andrejaš, Franc - Tuzla : Tehnološki fakultet Univerziteta u Tuzli, 2021, 18-18
Skup
VII International Scientific-professional Symposium: Environmental Resources, Sustainable Development And Food Production (OPORPH 2021)
Mjesto i datum
Tuzla, Bosna i Hercegovina, 12.11.2021
Vrsta sudjelovanja
Poster
Vrsta recenzije
Domaća recenzija
Ključne riječi
biodiesel, transesterification, isopentanol
Sažetak
Nowadays, due to the increasing environmental concerns, more and more emphasis is put on the research of renewable energy. Here, fatty acid isopentyl esters, also known as type of biodiesel, were synthesized and the influence of the reaction parameters on biodiesel conversion was investigated. The synthesis required a source of tryglicerides (here, sunflower oil) and an alcohol (here, isopentanol) as reactants, as well as a catalyst, specifically potassium hydroxide. Isopentanol was chosen as an alcohol since the presence of molecular branching could improve the biodiesel low-temperature properties, therefore excluding the need for corresponding fuel additives. The monitored reaction parameters were the reaction temperature, time, molar ratio of the reactants and the mass fraction of the catalyst. The obtained results suggested that the most significant reaction parameters are the molar ratio of the reactants and the mass fraction of the catalyst. According to the experimental plan, the highest conversion of 89.7 % was achieved when the reaction temperature was held at 40 °C, throughout 2.5 hours, with the molar ratio of the reactants of 7:1 and the mass fraction of the catalyst of 2 %.
Izvorni jezik
Engleski
Znanstvena područja
Kemija, Interdisciplinarne prirodne znanosti, Kemijsko inženjerstvo, Temeljne tehničke znanosti, Interdisciplinarne tehničke znanosti
POVEZANOST RADA
Projekti:
HRZZ-UIP-2019-04-5242 - Razvoj funkcionalnih biogoriva i (bio)aditiva te ispitivanje primjenskih svojstava mješavina s mineralnim gorivima (FunBioFA) (Faraguna, Fabio, HRZZ - 2019-04) ( CroRIS)
Ustanove:
INA-Industrija nafte d.d.,
Fakultet kemijskog inženjerstva i tehnologije, Zagreb
Profili:
Lucija Konjević
(autor)
Fabio Faraguna
(autor)
Mia Gotovuša
(autor)
Jelena Parlov Vuković
(autor)