Pregled bibliografske jedinice broj: 1155165
Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process
Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process // Tehnički glasnik - Technical journal, 15 (2021), 4; 491-497 doi:10.31803/tg-20210805120621 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1155165 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Suitability of Recycled PLA Filament Application in
Fused Filament Fabrication Process
Autori
Breški, Tomislav ; Hentschel, Lukas ; Godec, Damir ; Đuretek, Ivica
Izvornik
Tehnički glasnik - Technical journal (1846-6168) 15
(2021), 4;
491-497
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
design of experiment ; fused filament fabrication ; polylactic acid ; recycling
Sažetak
Fused filament fabrication (FFF) is currently one of the most popular additive manufacturing processes due to its simplicity and low running and material costs. Support structures, which are necessary for overhanging surfaces during production, in most cases need to be manually removed and as such, they become waste material. In this paper, experimental approach is utilised in order to assess suitability of recycling support structures into recycled filament for FFF process. Mechanical properties of standardized specimens made from recycled polylactic acid (PLA) filament as well as influence of layer height and infill density on those properties were investigated. Optimal printing parameters for recycled PLA filaments are determined with Design of Experiment methods (DOE).
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
