Pregled bibliografske jedinice broj: 1155115
Skidder Operator Vibration Exposure
Skidder Operator Vibration Exposure // ERGONOMICS 2020: Proceedings of the 8th International Ergonomics Conference / Sumpor, Davor ; Jambrošić, Kristian ; Jurčević Lulić, Tanja ; Milčić, Diana ; Salopek Čubrić, Ivana ; Šabarić, Irena (ur.).
Zagreb, Hrvatska: Springer, 2021. str. 25-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1155115 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Skidder Operator Vibration Exposure
Autori
Šušnjar, Marijan ; Pandur, Zdravko ; Zečić, Željko ; Kopseak, Hrvoje ; Bačić, Marin
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
ERGONOMICS 2020: Proceedings of the 8th International Ergonomics Conference
/ Sumpor, Davor ; Jambrošić, Kristian ; Jurčević Lulić, Tanja ; Milčić, Diana ; Salopek Čubrić, Ivana ; Šabarić, Irena - : Springer, 2021, 25-32
ISBN
978-3-030-66936-2
Skup
8th International Ergonomics Conference - Ergonomics 2020
Mjesto i datum
Zagreb, Hrvatska, 02.12.2020. - 05.12.2020
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Skidder ; Daily vibration exposure ; A(8) ; WBV ; HAV ; Engine operating modes
Sažetak
The exposure of workers to vibration is expressed as energy equivalent A(8), which is determined by the procedure clearly described in the international standard ISO 5349-1-2001. A(8) is a value that depends not only on the vibration level in certain operating procedures, but also on the duration of exposure. Research was conducted on Ecotrac 120 V and Ecotrac 140 V, the most used skidders in Croatian forestry. Vibration on the steering wheel and seat of the skidders was measured by vibrometer with triaxial accelerometer. Measurements were performed at three characteristic engine operating modes: idling, at maximum torque and full throttle. Daily exposure to vibration of a skidder operator A(8) is calculated based on structural data of daily working times in different working conditions as well as distribution of three characteristic engine operating modes of effective time. The results show differences in vibration levels between different types of tractors and working conditions. The research was carried out within the project “Development of hybrid skidder—HiSkid” co-financed by European Regional Fund in the scope of European Union Operational Program “Competitiveness and Cohesion” 2014– 2020 (2014HR16M1OP00-1.2).
Izvorni jezik
Engleski
Znanstvena područja
Šumarstvo
POVEZANOST RADA
Ustanove:
Fakultet šumarstva i drvne tehnologije
Profili:
Zdravko Pandur
(autor)
Marin Bačić
(autor)
Željko Zečić
(autor)
Marijan Šušnjar
(autor)
Hrvoje Kopseak
(autor)