Naslov
Corrosion and stray current influence on rails in urban tracks

Autori
Vranešić, Katarina ; Alar, Vesna ; Serdar, Marijana ; Lakušić, Stjepan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
INTERNATIONAL CONFERENCE ON MATERIALS corrosion, heat treatment, testing and tribology, 2021 Conference Proceedings / Stojanović, Ivan - Zagreb, 2021, 21-28

Skup
3rd International Conference on Materials: corrosion, heat treatment, materials testing and tribology (MTECH 2021)

Mjesto i datum
Šibenik, Hrvatska, 06.10.2021. - 09.10.2021

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Podatak o recenziji nije dostupan

Ključne riječi
corrosion, stray current, rails, urban track

Sažetak
Corrosion causes a large loss of material from the rail and rail fastening system, which is associated with a reduction in fastening load and can affect traffic safety. The rate of corrosion depends on the type of track and the environmental conditions around the rail. In closed rail formations built as a part of roadway surface, the corrosion process can be very rapid if the rails are not fully insulated, and if the track drainage system is not adequately maintained. In a very corrosive environment, the life of rail can be shortened to only a few years. Stray current corrosion is also very common on urban tracks due to very high frequency of traffic. Stray current is a major hazard for urban tracks and metal infrastructures near the tracks. In this work, the comparison of two rail samples, one exposed to electrochemical corrosion and the other exposed to stray current corrosion, has been carried out. The result analysis has showed the difference in the degradation of these two samples after the corrosion processes. The effect on the metal surface due to stray currents are also shown. Corrosion causes a large loss of material from the rail and rail fastening system, which is associated with a reduction in fastening load and can affect traffic safety. The rate of corrosion depends on the type of track and the environmental conditions around the rail. In closed rail formations built as a part of roadway surface, the corrosion process can be very rapid if the rails are not fully insulated, and if the track drainage system is not adequately maintained. In a very corrosive environment, the life of rail can be shortened to only a few years. Stray current corrosion is also very common on urban tracks due to very high frequency of traffic. Stray current is a major hazard for urban tracks and metal infrastructures near the tracks. In this work, the comparison of two rail samples, one exposed to electrochemical corrosion and the other exposed to stray current corrosion, has been carried out. The result analysis has showed the difference in the degradation of these two samples after the corrosion processes. The effect on the metal surface due to stray currents are also shown.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo

POVEZANOST RADA