Pregled bibliografske jedinice broj: 1150200
Degradation of polyethylene and polypropylene microplastics by advanced oxidation processes
Degradation of polyethylene and polypropylene microplastics by advanced oxidation processes // 27. HSKIKI
Veli Lošinj, Hrvatska, 2021. str. 1-1 (poster, domaća recenzija, sažetak, znanstveni)
CROSBI ID: 1150200 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Degradation of polyethylene and polypropylene microplastics by advanced oxidation processes
Autori
Bule, Kristina ; Prevarić, Viktorija ; Cvetnić, Matija ; Ukić, Šime ; Bolanča, Tomislav ; Miloloža, Martina ; Kučić Grgić, Dajana ; Markić, Marinko ; Matijašec, Dora
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Skup
27. HSKIKI
Mjesto i datum
Veli Lošinj, Hrvatska, 05.10.2021. - 08.10.2021
Vrsta sudjelovanja
Poster
Vrsta recenzije
Domaća recenzija
Ključne riječi
microplastics ; PE ; PP ; advanced oxidation processes
Sažetak
Plastic, due to its many advantages, is an inevitable material in everyday lives. Production and utilization are growing daily, and consequently, these types of materials are accumulating in the environment. Plastic particles smaller than 5 mm, called microplastics (MP), pose a major threat to aquatic organisms. MP can cause different harmful effects on various organisms.[1] Since classical removal methods are not effective enough, the use of advanced oxidation processes (AOPs) to degrade MP has recently been considered.[2] In this paper, two AOPs were conducted: UV-C/H2O2 and UV-C/S2O82-. Tested MP were polyethylene (PE) and polypropylene (PP), with particle sizes between 25 and 100 µm. The influence of pH value, MP mass, oxidant concentration, and process duration was investigated. The results indicated that UV-C/S2O82- had a greater impact on both used MP.
Izvorni jezik
Engleski
Znanstvena područja
Kemija, Kemijsko inženjerstvo, Interdisciplinarne tehničke znanosti
POVEZANOST RADA
Projekti:
HRZZ-IP-2019-04-9661 - Primjena naprednih tehnologija obrade voda za uklanjanje mikroplastike (AdWaTMiR) (Bolanča, Tomislav, HRZZ - 2019-04) ( CroRIS)
Ustanove:
Fakultet kemijskog inženjerstva i tehnologije, Zagreb
Profili:
Matija Cvetnić
(autor)
Kristina Bule Možar
(autor)
Šime Ukić
(autor)
Viktorija Martinjak
(autor)
Marinko Markić
(autor)
Martina Miloloža
(autor)
Dajana Kučić Grgić
(autor)
Tomislav Bolanča
(autor)