Pregled bibliografske jedinice broj: 1150008
Color reproduction on varnished cardboard packaging by using lower ink coverages due to the gray component replacement image processing
Color reproduction on varnished cardboard packaging by using lower ink coverages due to the gray component replacement image processing // Color Research & Application, 47 (2021), 1; 172-181 doi:10.1002/col.22704 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1150008 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Color reproduction on varnished cardboard
packaging by using lower ink coverages due to the
gray component replacement image processing
Autori
Cigula, Tomislav ; Hudika, Tomislav ; Donevski, Davor
Izvornik
Color Research & Application (0361-2317) 47
(2021), 1;
172-181
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
cardboard packaging ; color difference ; gray component replacement ; varnishing
Sažetak
Even in these challenging times, cardboard packaging industry is increasing its revenue with stable annual increase prediction, but customers are increasing demands on the packaging with respect to environmental protection, attractiveness, and branding. This article aims to determine the influence of image processing in terms of gray component replacement and overprint varnishing on the color reproduction on a cardboard packaging material. A test chart with tertiary colors was defined and modified by different gray component replacement levels. It was printed in accordance with ISO norm on coated and uncoated cardboard and finished by overprinting water based , offset, and UV varnish. The prepared samples were evaluated by measuring surface coverage, tone value increase (dot gain) of primary colors and calculating dE00 of defined tertiary colors. The results showed that gray component replacement application reduces ink consumption. Higher gray component replacement applied results in lower ink surface coverage, but the decrease is also dependent on the image content. The TVI (dot gain) is significantly influenced only by applying UV varnish, resulting with higher TVI. The color differences of the tertiary colors showed that increased level of the gray component replacement applied did not cause significant color differences, even decreased color difference in some cases. Additionally, applying gray component replacement decreased color differences in “reddish” part of the gamut. This research proved that lowering the ink consumption due to the gray component replacement will not cause significant differences in the color reproduction. Further-more, varnishing with commercial offset or water-based varnish will not cause higher deviations in color reproduction, but use of the UV varnish would.
Izvorni jezik
Engleski
Znanstvena područja
Grafička tehnologija
POVEZANOST RADA
Projekti:
UIP-2017-05-4081 - Razvoj modela za povećanje efikasnosti izrade i funkcionalnosti grafičke ambalaže (MEGA) (Cigula, Tomislav, HRZZ - 2017-05) ( CroRIS)
Ustanove:
Grafički fakultet, Zagreb
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus