Pregled bibliografske jedinice broj: 1148233
Measurement Uncertainty Evaluation of Transmission Line Parameters
Measurement Uncertainty Evaluation of Transmission Line Parameters // IEEE Transactions on Instrumentation and Measurement, 70 (2021), 1-7 doi:10.1109/tim.2021.3070600 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1148233 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Measurement Uncertainty Evaluation of Transmission
Line Parameters
Autori
Vlahinic, Sasa ; Frankovic, Dubravko ; Durovic, Marijana Zivic ; Stojkovic, Nino
Izvornik
IEEE Transactions on Instrumentation and Measurement (0018-9456) 70
(2021);
1-7
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Measurement uncertainty ; phasor measurement unit (PMU) ; transmission line parameters
Sažetak
Transmission line parameters vary with environmental and operating conditions, thus introducing uncertainties in power flow studies and protection zone settings of relay protection equipment. Variations in line parameters are fundamental for the determination of static and dynamic line power ratings. Usually, nominal values are given without an associated confidence interval, and therefore an important piece of information is missing. With the proliferation of phasor measurement units (PMUs) that allows for synchronized measurements at different geographical positions arouse the possibility for simple and efficient measurements of line parameters. This article analyzes uncertainties associated with the estimation of line parameters, based on the equivalent π model, valid for short- and medium-length transmission lines. This problem has been addressed in literature, but only from a theoretical perspective and the obtained results were verified with simulations only. Here, measurements conducted on two 220-kV transmission lines are analyzed. It was found that the correlation between voltage and current measurements must be taken into consideration when analyzing uncertainty propagation law. Only then statistical analysis of estimations matches the predictions obtained by applying the theoretical model. Accuracy limits were analyzed as well, but in this case some results were within the calculated limits, while others did not follow predictions. Improvements in accuracy limits’ determination require the separation of environmental and operating condition variations from deviations due to measurement equipment, thus requiring additional information.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Tehnički fakultet, Rijeka
Profili:
Nino Stojković
(autor)
Dubravko Franković
(autor)
Saša Vlahinić
(autor)
Marijana Živić-Đurović
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus