Pregled bibliografske jedinice broj: 1142703
Coupled two-carrier planetary gearboxes for two- speed drives
Coupled two-carrier planetary gearboxes for two- speed drives // MACHINES TECHNOLOGIES MATERIALS 2021
Varna, 2021. str. 149-155 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1142703 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Coupled two-carrier planetary gearboxes for two-
speed drives
Autori
Troha, Sanjin ; Karaivanov, Dimitar ; Vrcan, Željko ; Marković, Kristina ; Šoljić, Antonio
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
MACHINES TECHNOLOGIES MATERIALS 2021
/ - Varna, 2021, 149-155
Skup
18th International Scientific Congress "Machines. Technologies. Materials."
Mjesto i datum
Varna, Bugarska, 08.09.2021. - 11.09.2021
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
COUPLED PLANETARY GEARS, STRUCTURAL ANALYSIS, EFFICIENCY, 3D MODEL
Sažetak
The following paper reviews all the possible cases of coupled two-carrier planetary gears with four external shafts. An emphasis is made on the work of these gears with one degree of freedom, one input and one output shaft and brakes on the other two shafts . When switching over the gears, the speed ratio of the gear is changed, thus allowing the use in two-speed mechanical transmissions of technological lifting and other machines. Some relations are deduced for determining the speed ratios and the efficiency of all structural schemes. Recommendations for the selection of the most appropriate structural scheme according to the current necessities can be made. A 3D model of the S13V3 two-speed, two-carrier gearbox was created to demonstrate the process of determining the viability of a particular gearbox layout.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Tehnički fakultet, Rijeka