Pregled bibliografske jedinice broj: 1139657
Thermal properties of different poly(alkymethacrylate) additives and their influence on low temperature properties of mineral diesel fuel
Thermal properties of different poly(alkymethacrylate) additives and their influence on low temperature properties of mineral diesel fuel // Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021) / Rotaru, Andrei ; Erceg, Matko (ur.).
Split: SITECH, 2021. str. 143-143 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1139657 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Thermal properties of different
poly(alkymethacrylate) additives and
their influence on low temperature properties
of mineral diesel fuel
Autori
Pucko, Ivan ; Racar, Marko ; Faraguna, Fabio
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021)
/ Rotaru, Andrei ; Erceg, Matko - Split : SITECH, 2021, 143-143
ISBN
978-606-11-7861-2
Skup
6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC) ; 15th Mediterranean Conference on Calorimetry and Thermal Analysis (MEDICTA)
Mjesto i datum
Split, Hrvatska, 20.07.2021. - 24.07.2021
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Polymer additives ; Low-temperature properties ; Diesel fuel
Sažetak
Mineral diesel fuel is one of the main products of crude oil refining. It is obtained by mixing petroleum fractions and light gas oil fractions with a boiling range 130 - 370 °C and used in an internal combustion diesel engine where compression causes self-ignition of a mixture of fuel and air. Diesel fuel contains a substantial amount of paraffin waxes that begin to crystallize at low temperatures and tend to agglomerate. The big wax crystals can plug filters affecting the cold flow plugging point (CFPP) and also the pour point (PP) of diesel fuel. In this study, the low temperature properties of non-additivated mineral diesel fuel with the addition of poly(alkyl methacrylate) (PAMA) additives A1 - C3 were investigated. Thermal transitions temperatures were determined using the differential scanning calorimetry (DSC) for pure polymer additives and for diesel blends with up to 2000 ppm of additives. Standard tests for low-temperature properties (HRN EN 116 for CFPP and ASTM D 5950 for PP) have shown that they lower the temperature of CFPP up to 10 °C and PP up to 30 °C.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo, Temeljne tehničke znanosti, Interdisciplinarne tehničke znanosti
POVEZANOST RADA
Projekti:
HRZZ-UIP-2019-04-5242 - Razvoj funkcionalnih biogoriva i (bio)aditiva te ispitivanje primjenskih svojstava mješavina s mineralnim gorivima (FunBioFA) (Faraguna, Fabio, HRZZ - 2019-04) ( CroRIS)
Ustanove:
Fakultet kemijskog inženjerstva i tehnologije, Zagreb
