Naslov
Effect of SiO2 and TiO2 Nanoparticles on the Performance of UV Visible Fluorescent Coatings

Autori
Mahović Poljaček, Sanja ; Tomašegović, Tamara ; Leskovšek, Mirjam ; Stanković Elesini, Urška

Izvornik
Coatings (2079-6412) 11 (2021), 8; 928, 18

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
UV visible fluorescent coatings ; nanoparticles ; SiO2 ; TiO2

Sažetak
In the present research, the properties of ultraviolet (UV) visible (daylight invisible) fluorescent coatings modified by the addition of SiO2 and TiO2 nanoparticles were studied. Structural, surface, and mechanical properties and changes in the coatings caused by accelerated ageing were analyzed. The results showed that the addition of nanoparticles caused the changes in unaged and aged printed coatings. Reflectance measurements of modified coatings showed that addition of TiO2 nanoparticles improved the visual effect of the unaged coatings. Furthermore, results have shown that the addition of SiO2 did not diminish the reflectance of the modified coatings after ageing. The results of roughness measurements showed that the addition of SiO2 decreased roughness after the ageing process, probably due to the degradation process indicated by Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy. The roughness of the coatings with TiO2 nanoparticles was increased after the ageing on the samples with higher concentrations of TiO2 due to the agglomerates of plastisol formed on the surface of the coatings, visible in SEM images. Surface analysis of coatings showed that TiO2 caused an increase in the polarity of the surface coatings. Results of the bending stiffness showed that the addition of the nanoparticles to the coating, especially of SiO2, significantly improved the bending stiffness of the unaged samples.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija, Kemijsko inženjerstvo

POVEZANOST RADA