Naslov
Catalytic pyrolysis of mechanically non-recyclable waste plastics mixture: Kinetics and pyrolysis in laboratory-scale reactor
(Catalytic pyrolysis of mechanically non-recyclable waste plastics mixture: Kinetics and pyrolysis in laboratory-scale reactor)

Autori
Kremer, Irma ; Tomić, Tihomir ; Katančić, Zvonimir ; Erceg, Matko ; Papuga, Saša ; Parlov Vuković, Jelena ; Schneider, Daniel Rolph

Izvornik
Journal of environmental management (0301-4797) 296 (2021); 113145, 11

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
non-recyclable plastics ; pyrolysis ; isoconversional method ; kinetic study ; zeolite catalyst

Sažetak
Post-consumer waste plastics that cannot be mechanically recycled represent a concerning environmental issue. According to the latest available data for Europe, as much as 25% of collected post-consumer waste plastics are landfilled, 43% is energy recovered, and 32% is recycled. One possible way of recovering non- recyclable plastics is pyrolysis, which is considered environmentally friendly technology for obtaining fuel or chemicals from plastic waste. To tackle the challenge of recovering non-recyclable plastics via pyrolysis, it is necessary to determine their actual composition. Visual separation of collected non-recyclable plastics was performed, and Fourier-transform infrared spectroscopy was used to confirm the accuracy of visual separation. A significant amount of plastics labelled as “other” was found. Since the composition of “other” waste plastics has not been sufficiently investigated, relatively few studies on their pyrolysis have been conducted. Therefore, they were characterised and added to the mixture with other found polymer types of non-recyclable plastics. Thermogravimetric analysis was conducted to determine thermochemical behaviour and kinetic parameters required for laboratory pyrolysis investigation. Kinetic analysis was conducted using the Friedman isoconversional model-free method and non-linear multivariate regression method. The goal of this paper was to analyse the kinetics, determine the product yield and characteristics of the pyrolysis process of non-recyclable plastics over zeolite catalysts. It was found how the decomposition of non- recyclable plastics occurs in two decomposition steps. The activation energy of non-recyclable plastics was 144 kJ/mol in the first stage of decomposition and 262 kJ/mol in the second stage of decomposition. It decreased by 34% and 6.5% after fresh fluid catalytic cracking catalyst was added and 41% and 18.3% with iron- modified Zeolite Socony Mobil-5 catalyst. The yield of condensate was 55% (wax) for the original sample, and it decreased to 50% (wax and oil) and 27% (mostly oil) with fresh fluid catalytic cracking and iron modified Zeolite Socony Mobil-5 catalysts. Processes with catalysts promoted the formation of olefins and aromatic compounds in pyrolytic oil. All pyrolysis products had a high value of higher heating value ranging from 39 MJ/kg to 43 MJ/kg showing good potential for further energy use.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Strojarstvo, Interdisciplinarne tehničke znanosti

POVEZANOST RADA