Pregled bibliografske jedinice broj: 1118816
Analysis of Natural and Artificial Aging Influence on UV Inkjet Prints on Printing Substrates with Straw Pulp
Analysis of Natural and Artificial Aging Influence on UV Inkjet Prints on Printing Substrates with Straw Pulp // Proceedings of the 8th international conference on sustainable development (ICSD) / Çınar, Özer (ur.).
Istanbul: CNR Group Publishing, 2020. str. 24-31 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1118816 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of Natural and Artificial Aging
Influence on UV Inkjet Prints on Printing
Substrates with Straw Pulp
Autori
Bates, Irena ; Petric Maretić, Katja ; Rudolf, Maja ; Plazonić, Ivana ; Radić Seleš, Valentina ; Jungwirth, Stella ;
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 8th international conference on sustainable development (ICSD)
/ Çınar, Özer - Istanbul : CNR Group Publishing, 2020, 24-31
ISBN
978-605-81426-4-0
Skup
6th International Conference on Sustainable Development (ICSD 2020)
Mjesto i datum
Skopje, Sjeverna Makedonija; online, 04.11.2020. - 08.11.2020
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
aging ; optical stability ; printing substrate ; straw pulp ; UV inkjet printing
Sažetak
Paper substrate, as the most common used substrate for printing labels or packaging, is traditionally produced from cellulose fibres derived from wood. The growth of a large number of industries has led to a significant increase in the use of such resource, which consequently led to a global awareness of the possibility of forest exploitation and the importance of reusing waste paper as a source of fibres. Hence, paper fibres can be recycled up to seven times and it is important to enrich paper pulp with virgin fibres during paper production. In such a way, the characteristics of the paper and the quality of the printed elements are improved. In this paper, cereal straw as an alternative resource of virgin fibres was turned into pulp and mixed with recycled wood pulp to conduct printing substrates using laboratory equipment. Since aging is an inevitable process of any printing substrates and prints, and the degradation of print quality due to aging largely depends on the properties of the printing substrate, ink and type of printing. This research was focused on analyzing optical stability of prints made on printing substrates with straw pulp by UV inkjet technique after natural and artificial aging. From a comparison of the aging processes based on the Euclidean difference results, it was observed that natural aging of UV inkjet prints yields less colour changes compared to artificial aging. Greater or equal optical stability after aging was perceived for prints on printing substrates with wheat, barley and triticale pulp compared to prints on substrates made with recycled wood pulp.
Izvorni jezik
Engleski
Znanstvena područja
Grafička tehnologija
Napomena
This work has been supported in part by Croatian
Science Foundation under the project
„Printability, quality and utilization of
substrates with non-wood fibres“ (UIP-2017-05-
2573) and by the University of Zagreb.
POVEZANOST RADA
Projekti:
UIP-2017-05-2573 - Otiskivanje, kvaliteta i uporabljivost podloga s ne-drvnim vlakancima (NWF prints quality) (BATES, IRENA, HRZZ - 2017-05) ( CroRIS)
Ustanove:
Grafički fakultet, Zagreb
Profili:
Valentina Radić Seleš
(autor)
Irena Bates
(autor)
Ivana Plazonić
(autor)
Katja Petric Maretić
(autor)
Maja Rudolf
(autor)