Naslov
Effect of nano-filled protective coating and different pH enviroment on wear resistance of new glass hybrid restorative material

Autori
Brkanović, Sandra ; Ivanišević, Ana ; Miletić, Ivana ; Mezdić, Dražen ; Jukić Krmek, Silvana

Izvornik
Materials (1996-1944) 14 (2021), 4; 755, 10

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
glass ionomer ; wear resistance ; acid load ; artificial saliva

Sažetak
The purpose of the study was to determine the wear rate of Equia Forte HT Fil with Equia Forte Coat or without coating and compare it with Fuji IX GP high-viscosity glass ionomer cement (GIC) in conditions with acid load or at neutral pH. The samples were stored for 7 days: (1) in artificial saliva, (2) in artificial saliva and cyclically exposed to low pH, and (3) in distilled water and cyclically exposed to low pH. Wear was determined by measuring the difference in mass before and after brushing in an abrasion testing device. The wear of Fuji IX GP was significantly higher than that of Equia Forte HT Fil with or without coating (p = 0.000). The difference between Equia Forte HT Fil with and without Coat was not statistically significant (p < 0.803). The differences in wear resistance between samples stored in saliva and in distilled water were not significant (p = 0.588). Periodic exposure to the low pH solution significantly affected the wear resistance of all materials (p = 0.000). Equia Forte HT Fil was more resistant to wear than Fuji IX GP in all storage conditions. A resinous coat did not significantly increase wear resistance.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Dentalna medicina

POVEZANOST RADA