Naslov
Influence Of Guiding Part Of Reamer Upon The Geometry Of The Reamed Bore

Autori
Šestan, Anton ; Dundović, Čedomir ; Hriešik, Andrej

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
CIM 97- Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko - Zagreb : Croatien Association of Production Engineering, 1997, B123-B128

Skup
4th International Conference on Production Engineering

Mjesto i datum
Opatija, Hrvatska, 12.06.1997. - 13.06.1997

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Cylindrical Reamer; Length Of The Cylindrical Part; Guiding Part; Conical Part; Deviation Of The Bore Diameter

Sažetak
This paper presents the deviation measurement results of the diameters and conical parts of the reamed bores in steel with standard cylindrical reamers with guiding edges with various lengths of the cylindrical part and various conicity of the conical part. By lengthening the cylindrical part in principle, more determined concinity of the bore are obtained, but only with the length of the cylindrical part of 3 mm this determination becomes well defined. With longer cylindrical parts of the guiding edges, the tendency of sticking of the reamer in the bore used to occur. Changes of the conicity of the secondary edges have not affected the size of the generated conicity of the bore. As regards the size of the bore diameter deviation, the length of the cylindrical part has generated minimal deviationus.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA