Naslov
Reducer with a planetary gear train for a hoisting mechanism of dangerous goods cranes

Autori
Theochari, Grigoria ; Troha, Sanjin ; Karaivanov, Dimitar

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni

Izvornik
TECHNOLOGICAL BASIS OF "INDUSTRY 4.0" SOCIETY & „INDUSTRY 4.0" / - , 2020, 161-164

Skup
V International Scientific Conference: Industry 4.0

Mjesto i datum
Borovec, Bugarska, 09.12.2020. - 12.12.2020

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
CRANES, DANGEROUS GOODS, GEAR TRAIN, HANDLING MACHINES

Sažetak
In addition to the universal requirements for handling (lifting and transport) machines (HM), HM for dangerous goods (hot molten metal, containers with chemicals, explosives, etc.) must also meet a number of special requirements. One of these requirements is the drive of the hoisting mechanism with two motors, to ensure in case one of them fails. The article discusses a reducer for the hoisting mechanism of an overhead crane for dangerous goods with an embedded planetary gear train, allowing both motors to operate at full power (and without overload) in both regular and emergency (in failure) mode. The different modes of work of the mechanism are considered (with both motors and with each one separately). An analysis of the possible kinematic schemes of the planetary gear train is made. The necessary kinematic calculations have been made to select the most suitable variant of the planetary gear train.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Tehnologija prometa i transport, Temeljne tehničke znanosti

POVEZANOST RADA