Pregled bibliografske jedinice broj: 1093189
EFFECT OF SURFACE ROUGHNESS ON WOOD ADHESION
EFFECT OF SURFACE ROUGHNESS ON WOOD ADHESION // 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology : Proceedings ; University of Banja Luka, Faculty of Mechanical Engineering, 26th - 28th May 2011 / Gordana, Globocki-Lakic ; Rogić, Miroslav (ur.).
Banja Luka: Faculty of Mechanical Engineering Banja Luka, 2011. str. 321-326 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1093189 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
EFFECT OF SURFACE ROUGHNESS ON WOOD ADHESION
Autori
Obućina, Murčo ; Škaljić Nedim ; Smajić, Selver
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology : Proceedings ; University of Banja Luka, Faculty of Mechanical Engineering, 26th - 28th May 2011
/ Gordana, Globocki-Lakic ; Rogić, Miroslav - Banja Luka : Faculty of Mechanical Engineering Banja Luka, 2011, 321-326
ISBN
978-99938-39-36-1
Skup
10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology : Proceedings = Zbornik radova, University of Banja Luka, Faculty of Mechanical Engineering, 26th - 28th May 2011
Mjesto i datum
Banja Luka, Bosna i Hercegovina, 26.05.2011. - 28.05.2011
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
hrapavost, čvrstoća lijepljenja, blanjanje, režimi obrade
(roughness, bonding strength, planing, cutting conditions)
Sažetak
This paper presents research impact planed surface roughness of beech, fir, oak and thermally modified beech-wood (220°C) samples, the strength of bonding. The samples were planed in the radial direction. Tools for planing had a double-edged, planed and the displacement at a speed of 12 m / min. The depth of the milling operation was 1.00 mm, rake angle blade tool was γ = 15 °. at 6000 ° / min, 5000° / min, and 8000° / min.Diameter of the cutting edge was Φ = 125 mm. Surface roughness is measured by the length of treatment using an electrical-mechanical profilmetra Mitutoyo SJ-201. Samples were glued with PVAc glue. The lowest roughness had samples of oak, then fir and beech the highest, and thermally treated beech. The highest shear bond strength, they had samples of beech, followed by oak, fir, and had the lowest strength of the samples we did thermally modified beech. Keywords: roughness, bonding strength, planing, cutting conditions
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Šumarstvo, Drvna tehnologija
POVEZANOST RADA
