Pregled bibliografske jedinice broj: 1091177
Colour Quality Testing of Cyan Offset Prints Depending on Pigment Concentration and Different CTP Screening Mode
Colour Quality Testing of Cyan Offset Prints Depending on Pigment Concentration and Different CTP Screening Mode // Proceedings - The Tenth International Symposium GRID 2020 / Dedijer, Sandra (ur.).
Novi Sad: UNIVERSITY OF NOVI SAD FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN, 2020. str. 421-428 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1091177 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Colour Quality Testing of Cyan Offset Prints Depending on
Pigment Concentration and Different CTP Screening Mode
Autori
Mustač, Sandra ; Majnarić, Igor ; Bauk, Stanko ; Miloš, Slaven
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings - The Tenth International Symposium GRID 2020
/ Dedijer, Sandra - Novi Sad : UNIVERSITY OF NOVI SAD FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN, 2020, 421-428
ISBN
978-86-6022-303-8
Skup
10th International Symposium On Graphic Engineering And Design (GRID 2020)
Mjesto i datum
Novi Sad, Srbija, 12.11.2020. - 14.11.2020
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Offset printing, Cyan offset ink, filler additive, AM and FM CTP screening
Sažetak
Ne of the problems in the offset printing technique is the picking of uncoated paper, which occurs due to the activity of pressure cylinder and sticky offset inks. To reduce offset ink stickiness, it is possible to add cheaper ink filler that will indirectly reduce the concentration of pigment. However, there is also a reduction in the colour tones and quality of reproduction. In this experiment we used: standard cyan offset ink (Sun Lit Express ink which consists of phthalocyanine based pigment) and high-quality gloss coated cardboard (250 g/m2 Euroart plus gloss). This paper aims to show how the CTP screening type (AM/FM mode) and the CTP line screening (80, 100, 120 line/cm and 10 µm, 20 µm 25 µm diameter of print elements) manifest on the reproduction quality of a standard gradation wedge. This research will create the possibility of correlating the factors of user reduction of pigment concentration and reproduction quality of cyan colour separation. By using the AM screenings and adding different concentrations of ink filler, more stable cyan prints are achieved.
Izvorni jezik
Engleski
Znanstvena područja
Grafička tehnologija
Napomena
Rad je financijski potpognut sredstvima Sveučilišne potpore za ak. god. 2019_2020.
POVEZANOST RADA
Ustanove:
Grafički fakultet, Zagreb
