Pregled bibliografske jedinice broj: 1085467
Comparison of anisotropic properties of woven fabrics and knitted fabrics subjected to tensile load
Comparison of anisotropic properties of woven fabrics and knitted fabrics subjected to tensile load // BOOK OF PROCEEDINGS 13th International Scientific Professional Symposium TEXTILE SCIENCE & ECONOMY / Petrak, Slavenka ; Zdraveva, Emilija ; Mijović, Budimir (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2020. str. 146-151 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 1085467 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Comparison of anisotropic properties of woven fabrics and knitted fabrics subjected to tensile load
Autori
Penava, Željko ; Šimić Penava, Diana ; Jovanović, Tea
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
BOOK OF PROCEEDINGS 13th International Scientific Professional Symposium TEXTILE SCIENCE & ECONOMY
/ Petrak, Slavenka ; Zdraveva, Emilija ; Mijović, Budimir - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2020, 146-151
Skup
13th International Scientific-Professional Symposium "Textile Science and Economy (TSE 2020)
Mjesto i datum
Zagreb, Hrvatska, 18.09.2020
Vrsta sudjelovanja
Ostalo
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
anisotropy, modulus of elasticity, double weft knit fabric, cotton woven fabric, off-axes tensile behavior, maximum force
Sažetak
Theoretical analysis of the behavior of textile materials due to its anisotropic properties is very complex, and experimental testing of mechanical properties of knitted and woven fabrics is carried out. Measuring the stretch of knitted and woven fabrics when tensile forces act in different directions is an effective way to characterize anisotropy and structural changes of textiles. This paper analyzes the effect of anisotropy of knitted and woven fabrics on values of maximum force, maximum elongation, modulus of elasticity, work up to maximum force under action of tensile forces on samples that were cut at different angles to course direction of knitted fabrics, or to weft direction of woven fabrics. In experimental part of paper, samples of double weft knit fabric with 30 tex fineness of single cotton yarn and samples of cotton woven fabric in plain weave were tested. For different cutting angles of samples, curves of relationship between values of tensile forces and elongation to break were experimentally obtained. From the obtained force-elongation curves, modulus of elasticity was experimentally determined and work up to maximum force was calculated.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Tekstilna tehnologija, Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Građevinski fakultet, Zagreb,
Tekstilno-tehnološki fakultet, Zagreb