Naslov
CFD study of thermal managemant of the Ford Otosan truck underhood

Autori
Iličić, Dominik

Vrsta, podvrsta i kategorija rada
Ocjenski radovi, diplomski rad, diplomski

Fakultet
Fakultet strojarstva i brodogradnje

Mjesto
Zagreb

Datum
12.07

Godina
2019

Stranica
99

Mentor
Jasak, Hrvoje

Ključne riječi
CFD ; OpenFOAM ; foam-extend ; underhood thermal management ; heat transfer ; heat exchanger ; ANSA ; MRF ; porous media

Sažetak
Underhood thermal management is a crucial task in the design of new heavy-duty vehicles. Results of performing thermal analysis are used for stress analysis, i.e. it is one of the first steps in an integrated process of dimensioning parts related to thermal conditions. This only emphasises its importance in prototype design. In the CFD simulation, geometry of the underhood parts is rather complex and there is a need for engineer’s decision on removing redundant parts to reduce computational time and resource. Advanced meshing algorithms help in this process, but it still requires the largest amount of time. Due to the compact heat exchanger’s geometry, that requires millions of cells, there is a need for accurate models that represent this feature. In industry, every heat exchanger is experimentally tested. This can be used to model pressure drop and heat effectiveness, ultimately gaining an accurate model for CFD simulations. A new heat exchanger model was developed in foam-extend for purpose of simulating automotive compact micro-channel heat exchanger with one pass. This model was successfully validated through testing on each individual exchanger from a truck’s geometry, and their simultaneous work has been analysed. Truck’s fan was modelled as the Multiple Rotating Frame (MRF) zone, while the heat exchangers were modelled as porous zones with Darcy’s law. Pre- processing of the truck’s geometry was performed in ANSA. Simulations were done in two steps: First, the cold flow simulation was performed, after which the temperature field was solved separately including both streams. Both simulations showed stable convergence. Results are presented in the last chapter in the form of figures and total heat rejection of each heat exchanger for one operational condition. Lastly, in this study the heat exchanger's effectiveness was assumed to be constant, with experimental data this approach can be broader in terms of implementing effectiveness dependency on Number of Transfer Units (NTU).

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA