Pregled bibliografske jedinice broj: 1083308
The Influence of Amount of Layer on the Bending Strenght by Longitudinal Finger-jointing Wood Elements
The Influence of Amount of Layer on the Bending Strenght by Longitudinal Finger-jointing Wood Elements // Procedia engineering, 69 (2014), 1094-1099 doi:10.1016/j.proeng.2014.03.096 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1083308 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Influence of Amount of Layer on the Bending
Strenght by Longitudinal Finger-jointing Wood
Elements
Autori
Obucina, Murco ; Gondzic, Enil ; Smajic, Selver
Izvornik
Procedia engineering (1877-7058) 69
(2014);
1094-1099
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
amount-of-adhesive-layer ; bending-strenght ; finger-joint ; glued-laminated-beams
Sažetak
Test of bending strength section obtained through longitudinal connecting wooden elements was carried out by an experimental method. The test samples were formed of fir/spruce and using polyurethane adhesive PURBOND HB S609, a total of 243 samples has been formed. Testing the effects of the amount of adhesive on the bending strength of linear coupled sections was carried out on three levels (180, 200, 220) g/m2. This paper attempts to prove assumption that excessive increase in the quantity of adhesive in the adhesive film comes to impairment glued joint strength.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Drvna tehnologija, Biotehnologija
POVEZANOST RADA
Ustanove:
Fakultet šumarstva i drvne tehnologije
