Pregled bibliografske jedinice broj: 1079053
Tolerance Analysis of Mechanical Parts
Tolerance Analysis of Mechanical Parts // Tehnički glasnik - Technical journal, 14 (2020), 3; 265-272 doi:10.31803/tg-20200504092314 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1079053 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Tolerance Analysis of Mechanical Parts
Autori
Kondić, Živko ; Tunjić, Đuro ; Maglić, Leon ; Horvatić Novak, Amalija
Izvornik
Tehnički glasnik - Technical journal (1846-6168) 14
(2020), 3;
265-272
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Monte Carlo simulation ; one-way clutch ; Root Sum Square ; tolerance analysis ; Worst Case analysis
Sažetak
The determination of tolerances has a huge impact on the price and quality of products. The objective of tolerance analysis is to provide the widest possible tolerance range of parts, without disturbing the functionality of the assembly. Tolerance analysis should be performed during the design process because then there is still the possibility for change. For the purpose of carrying out the analysis, three methods will be used: Worst Case method, Root Sum Square method and Monte Carlo Simulation. Methods are explained through simple examples and applied on the one-way clutch.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb,
Strojarski fakultet, Slavonski Brod,
Sveučilište Sjever, Koprivnica
Profili:
Amalija Horvatić Novak
(autor)
Leon Maglić
(autor)
Živko Kondić
(autor)
Đuro Tunjić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
