Pregled bibliografske jedinice broj: 1078971
Development of a New Alloying System for Tool Steels Based on Thermodynamic Parameters
Development of a New Alloying System for Tool Steels Based on Thermodynamic Parameters // 5th Annual FAMENA PhD Workshop and 2nd joint Conference of Postgraduate Students DrLMZ / Jokić, Andrej ; Kožuh, Stjepan ; Bauer, Branko ; Degiuli, Nastia ; Duić, Neven ; Landek, Darko ; Lisjak, Dragutin ; Lulić, Zoran ; Matijević, Božidar ; Runje, Biserka ; Sorić, Jurica ; Terze, Zdravko ; (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 44-44 (radionica, domaća recenzija, sažetak, ostalo)
CROSBI ID: 1078971 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Development of a New Alloying System for Tool
Steels Based on Thermodynamic Parameters
Autori
Brajčinović, Sandra
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, ostalo
Izvornik
5th Annual FAMENA PhD Workshop and 2nd joint Conference of Postgraduate Students DrLMZ
/ Jokić, Andrej ; Kožuh, Stjepan ; Bauer, Branko ; Degiuli, Nastia ; Duić, Neven ; Landek, Darko ; Lisjak, Dragutin ; Lulić, Zoran ; Matijević, Božidar ; Runje, Biserka ; Sorić, Jurica ; Terze, Zdravko ; - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; Metalurški fakultet Sveučilišta u Zagrebu, 2019, 44-44
Skup
5th Annual FAMENA PhD Workshop ; 2nd joint Conference of Postgraduate Students
Mjesto i datum
Zagreb, Hrvatska, 28.06.2019
Vrsta sudjelovanja
Radionica
Vrsta recenzije
Domaća recenzija
Ključne riječi
Tool steels ; metallurgical processes ; thermodynamics ; alloying elements ; corrosion
Sažetak
Tool steels for hot work are designed for tools, which are heated during operation to a temperature higher than 200 °C. In such conditions, this group of tool steels is exposed to sudden temperature changes, high mechanical and impact loads, so extremely good properties are required from tool steels for hot work. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenum and chromium). Addition of alloying elements serves primarily purpose to improve the hardenabillity and to provide harder and thermally more stable carbides than cementite. Assuming proper heat treatment, the properties of a tool steel strongly depends on which alloying elements are added and their respective concentrations.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
