Pregled bibliografske jedinice broj: 1069326
Numerical investigation of heat transfer characteristics of pulverized coal in the combustion chambers of the heat energy centers of Kazakhstan
Numerical investigation of heat transfer characteristics of pulverized coal in the combustion chambers of the heat energy centers of Kazakhstan // Physical Sciences and Technology, 2 (2015), 2; 33-42 doi:10.26577/2409-6121-2015-2-2-33-42 (recenziran, članak, znanstveni)
CROSBI ID: 1069326 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Numerical investigation of heat transfer characteristics of pulverized coal in the combustion chambers of the heat energy centers of Kazakhstan
Autori
Askarova, A ; Bolegenova, S ; Jankoski, Zlatko ; Bekmukhamet, A ; Ospanova, Sh. ; Tolymkanova, B. ; Nagashybay Zh.
Izvornik
Physical Sciences and Technology (2409-6121) 2
(2015), 2;
33-42
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
BKZ-420, combustion, Ekibastuz coal, heat and mass transfer, modeling, pulverized coal, turbulence, two– phase flow
Sažetak
This article is devoted to the investigation of thermal characteristics of pulverized coal combustion process in the combustion chamber of the boiler BKZ-420. The greatest changes in the temperature distribution observed in the central part of the combustion chamber in the field of the fuel supply and the air fuel mixture are by burner holes. Carrying out the study of thermal characteristics is an important step during the modeling process of heat and mass transfer from the pulverized coal combustion, which allows to determine the temperature field throughout the volume of the combustion chamber and outlet. It has been determined the optimal combustion technology of high-energy fuel and the best structural parameters of the combustion chamber of the boiler BKZ-420 Almaty thermal power station that improve the wear resistance of power and reduce harmful emissions into the atmosphere (temperature decrease of the furnace wall, opposite the burners on the 3000C, ie 17.24% and secondary reduction of carbon monoxide concentration of CO at the outlet from the furnace at 15% carbon dioxide CO2 – 4.65%, and nitrogen dioxide NO2 – 14%).
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Sveučilište u Splitu,
Sveučilište u Splitu Sveučilišni odjel za stručne studije
Profili:
Zlatko Jankoski
(autor)