Pregled bibliografske jedinice broj: 1065163
The structure of the WC-Ag coating, obtained by electric explosive spraying, nitriding and following electronic beam treatment
The structure of the WC-Ag coating, obtained by electric explosive spraying, nitriding and following electronic beam treatment // Book of abstracts of the 14th International Symposium of Croatian Metallurgical Society - SHMD '2020, Materials and metallurgy (tiskano u: Metalurgija 59 (2020) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2020. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1065163 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The structure of the WC-Ag coating, obtained by electric explosive spraying, nitriding and following electronic
beam treatment
(The structure of the WC-Ag coating, obtained by
electric explosive spraying, nitriding and
following electronic beam treatment)
Autori
Romanov, D. ; Sosnon, K. ; Filyakov, A. ; Mamuzic, Ilija ; Gromov, V.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of abstracts of the 14th International Symposium of Croatian Metallurgical Society - SHMD '2020, Materials and metallurgy (tiskano u: Metalurgija 59 (2020) 3)
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2020, 429-429
Skup
14th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" (SHMD ‘2020)
Mjesto i datum
Šibenik, Hrvatska, 21.06.2020. - 26.06.2020
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
WC-Ag coating ; electric explosive spraying ; nitriding ; electronic beam treatment
Sažetak
The copper electrical contact with an area of 1 cm2 was subjected to three-stage processing. On the first stage, the WC-Ag coating was sprayed by the electro explosive method. The surface layer was nitrogenized further. At the third stage, it was provided repetitively- pulsed electron-beam treatment on the sprayed coating. The phase composition of the multi-stage coating consists of tungsten monocarbide, solid solutions of nitrogen and silver, as well as silver nitrides. The sprayed coating layer belongs to a class of nanomaterials. As a result of electron-beam finishing, the coating surface acquires a shining gloss.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Napomena
Konferencija je otkazana zbog pandemije COVID-19, ali su svi konferencijski materijali objavljeni.
