Pregled bibliografske jedinice broj: 1062949
Quantifying Tufa Growth Rates (TGRs) using Structure-from-Motion (SfM) Photogrammetry
Quantifying Tufa Growth Rates (TGRs) using Structure-from-Motion (SfM) Photogrammetry // GISTAM 2020 Abstracts
Prag, Češka Republika, 2020. str. 52-52 doi:10.13140/RG.2.2.26734.64329 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1062949 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Quantifying Tufa Growth Rates (TGRs) using
Structure-from-Motion (SfM) Photogrammetry
Autori
Marić, Ivan ; Šiljeg, Ante ; Cukrov, Neven ; Domazetović, Fran
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
GISTAM 2020 Abstracts
/ - , 2020, 52-52
Skup
6th International Conference on Geographical Information Systems Theory, Applications and Management (GISTAM 2020)
Mjesto i datum
Prag, Češka Republika, 07.05.2020. - 09.05.2020
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Tufa Growth Rate (TGR) ; Structure from Motion (SfM) ; Digital Surface Model (DSM)
Sažetak
The production of high-quality digital surface models (DSMs) is an increasing interest throughout the various geomorphometry studies. Consequently, a wide range of advanced geospatial methods has been used at different scales. Despite the fact that Structure-from-Motion (SfM) photogrammetry is one of the most popular methods until now it has not been systematically applied in the studies of tufa formation dynamics (TFD). In this paper, we propose a framework for using SfM photogrammetry and GIS tools in the measurement of tufa growth rates (TGRs). TGRs were measured on two limestone plates (PLs) within the area of Roški waterfall in Croatia. Four submillimetre resolution DSMs of tufa have been created. TGR was 0.407 mm for a six-month period. Checkpoints were used to calculate errors. The results confirm the efficiency of the SfM at this scale. Research shows that photogrammetric measurement system design can produce extremely dense point clouds with high horizontal and vertical accuracy. The application of SfM and GIS in the measurement of TFD can be the great methodological improvement for specific geomorphometric applications at smaller scales.
Izvorni jezik
Engleski
Znanstvena područja
Geografija
POVEZANOST RADA
Ustanove:
Institut "Ruđer Bošković", Zagreb,
Sveučilište u Zadru